Your cart is empty.
Your cart is empty.Product Description
- NOTICE: Before bid it,Pls confirm if your M.2 sock fit 22*110 SSD in your desktop. If you want to upgrade your Macbook SSD, pls buy our conversed side version:ST-NGFF2013-C.It can't Fit in laptop and can't read SSD with external USB3.0 nVME Case because 2013-2015 macbook SSD is PCIe ACHI,not nVME SSD.
- Alow to read or write SSD from 2013-2015 year Mac in M.2 M-Key slot in desktop,pls notice that it can't fit laptop
- Compatible with Samsung MZ-JPU128T, MZ-JPU256T,MZ-JPU512T,MZ-KPU1TOT,MZ-JPV1280
- Compatible with Sandisk SD6PQ4M-128G,SD6PQ4M-256G SSD
Golden plated contacts for best connectivity and long life.
The card is with original 12+16pin mac SSD socket.
It only can support 12+16pin SSD from 2013-2017 macbook Air ,late 2013-2015 macbook PRO and 2013-2017 IMAC.
Only fit in motherboard slot with 22*110 nVME SSD space
It can't work in M.2 SATA card or USB nVME card/case, because most of 2013-2015 Mac SSD is PCIe ACHI SSD. Only MAC SSD with nVME signal can work in USB nVME card.
Kendrick Gray
Reviewed in the United States on June 29, 2024
It didn't work at all...the computer didnt even detect it. Too much work to return it to get my 10 bucks aback. It is what it is.
JimmyDoo
Reviewed in the United Kingdom on August 8, 2022
Workerd straight away attached to the spare M2 fitting on my motherboard which was used to back the content of the hard drive of a damaged Macbook.
c. shen
Reviewed in the United Kingdom on December 20, 2022
As expected and allowed me to retrieve data from old Macbook pro (2015)
Kevin Paul Mcdonald
Reviewed in the United States on August 11, 2021
Installation was a breeze except for the support post for the Apple NVMe drive, that posed a bit of a "catch-22". I couldn't screw the adapter to the motherboard while the NVMe drive was attached, and I couldn't attach the NVMe drive with the board screwed onto the motherboard. In the end I just didn't screw the adapter to the MB since it felt secure. So far it works great! I haven't had any errors and the speed doesn't seem diminished by using the adapter. I am very satisfied, and happy that my 2TB drive isn't going to waste.
Jack
Reviewed in Australia on June 30, 2021
Does not work with Samsung MZ-JPV2560/0A3. I tried using an nmve to USB3 adapter and plugging it into my old Macbook Pro (A1502). It didn't appear on neither Disk Utility nor "diskutil list" in Terminal. I thought maybe it's because I'm using two adapters so I plugged it into a M.2 slot in a Ryzen 3900X Asus TUF x570 Gaming-plus WiFi running Debian 11. The device appeared but I could get no information off it. No smart status nor sector count. I tried Windows 10 on the same system and it showed up as a uninitialized disk without any information on it capacity or manufacturer.
Gianluca
Reviewed in Italy on May 28, 2021
Non funziona con i dischi Nvme AHCI della Apple, quindi occhio al modello che ci volete installare. Nella descrizione non era riportato (motivo per cui metto 3 stelle), ho dovuto restituirlo.
ANONYM
Reviewed in Germany on February 10, 2021
Geht nicht
Trestan
Reviewed in the United States on July 28, 2019
This is an adapter that allows you to insert your Macbook Pro 2015(A1502) SSD into your PC's motherboard. And it does that well. The caveat is, though, that this adapter will make that SSD quite 'fat'; it doesn't lay low against the motherboard anymore. So if you have a big graphic card, there's a chance that you won't be able to use any of your m.2 slots with this adapter. Anyway that's what happened with my Gigabyte Z370 Aorus Elite. I still recommend it to people who use Internal Graphics, people who just need to salvage their data, or have a different model of MB that may not be affected by the presence of a graphic card. Sintech's products are quite good quality.
Chris Atkinson
Reviewed in the United States on April 24, 2019
Awesome and super useful. A little big and can be difficult to install in tight places.
Common Sense
Reviewed in the United States on April 14, 2019
Easy to install IF you're a techie which I am but I can see some people not getting it right the first time because you would think that you put the drive in the mount first and then attach it to the computer but doing it that way blocks the whole you need to screw the mount into the motherboard to hold it steady so you actually screw in this first and then hand tighten in one of the carrier nuts, then insert the drive, and then insert the last screw to hold it all in. once you realize that it's literally a 30 second install and reboot and then format the hard drive from Mac if you don't want to use it as HFS and you have an additional hard drive for your machine. It will not, I repeat not run at nvme m. 2 speeds this is a satta adapter that will run at roughly 500 megabits per second, not the 3500 like most nvme drives wood in a native m. 2 slot so just know that before buying it, the Apple drives that this is made for are not nvme drives they are m. To pcie SATA drives which are much slower than nvme
Andy Branka
Reviewed in the United States on February 12, 2018
Very difficult to find product, so it saved my life.Thanks.
Customer
Reviewed in the United States on June 12, 2017
Item received exactly as described. Fast delivery.
MrHanMan
Reviewed in the United States on November 24, 2016
I was wanting to use the SSD from my dead MBP as a boot drive on my PC, but this device does not make the SSD bootable. It does however work just fine from within the OS. It only fit in my motherboard because I have two M.2 slots. The first slot had components too close to the adapter. Luckily, it just barely squeezed into the second slot. This isn't really the device's fault, though, and I can't see how it could be made much narrower. Just be sure you have enough room around your M.2 slot. All in all, I'm mostly satisfied, but very disappointed I couldn't boot to the SSD.
Recommended Products