Your cart is empty.
Your cart is empty.Length, 32 mm Thread diameter, 3/16inch Unit per package, 250 Lock nuts or nuts included, Yes Backers included, No Model, SS32R Number, 103138For Heavy Duty Track only 1 1/2inch and plus Caracteristics Oversized and pointed tungsten carbide For enhanced traction Hot dipped steel and galvanized stud Big tread for good anchoring Lasting durability Light Easy to install and dismantle 100, 150, 200, 250 and 1000 unit packages Installation Tool Included SS = Shoulder Stud (with shoulder) R = Racing (the carbide is pointed) Application Snowmobile, Motocross, ATV Technical Information Always pre drill with 1/16 inchdrill bit for snowmobile tracks. Ease installing and in pre drilling we are sure we are going to be in the middle of the track and that we are going to go right. Add soap on the stud treads for better penetration. For a 120ftft track, you need about 180 studs For 137ftft track, you need about 200 studs For 144ftft track, you need about 250 studs For the pattern of a snowmobile track, take the toughest studs. The gray part in the picture represents the snowmobile track stud. The iGRiP stud should be inserted as shown in the picture. The shoulder has to be embedded inside the track rubber and the shoulder flush with the rubber.
jim maurer
Reviewed in the United States on March 19, 2023
These were a game changer on my sled. Didn’t want to stud a single ply track but needed some sort of traction aide. World of difference on hard pack and ice. Highly recommend.
Recommended Products
