Shopping Cart

Your cart is empty.

Your cart is empty.

Speedway Motors 1982-88 T-Bird Steering Rack to GM Pump Power Steering Hose Kit with Adapters, 5/8'-18 Inverted Flare Pump End, Suitable for Aftermarket Racks

4.5 (6) Write Review
Free shipping on orders over $29.99

$124.99

$ 60 .99 $60.99

In Stock

About this item

  • Compatibility: This Power Steering Hose Kit is designed to adapt an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump, providing a seamless connection for your power steering system.
  • Versatile Fittings: The kit includes fittings that install into the aftermarket 1982-1988 T-bird type rack, including 9/16"-18 (14mm-1.5) O-ring for high pressure and 5/8"-18 (16mm-1.5) O-ring for low pressure return.
  • Inclusive Adapter: The kit comes with an adapter for the GM pump, making it compatible with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
  • Durable Design: An inexpensive alternative to stainless steel braided hose kits, the standard power steering hose assemblies provide a durable and cost-effective solution for your power steering system.
  • Precise Pressure Line: The pressure line in this kit features a 5/8"-18 male inverted flare fitting at the power steering pump end and a -6AN to a 9/16"-18 (14mm-1.5) male O-ring fitting on the rack end, ensuring a secure and leak-free connection.


Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts an aftermarket 1982-1988 T-Bird/Cougar type rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length. The pressure line in this kit has a 5/8"-18 male inverted flare fitting at the power steering pump end along with a -6AN to an 9/16"-18 (14mm-1.5) male O-ring fitting on the rack end. Note this is an O-ring style sealing design, and not an inverted flare sealing style. It also includes an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pump910-32908 or910-32922-FORD. Kit includes: Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting. The included fittings that will install into the aftermarket 1982-1988 T-bird type rack which are 9/16"-18 (14mm-1.5) O-ring (high pressure) and 5/8"-18 (16mm-1.5) O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.


Mike
Reviewed in the United States on December 4, 2024
O-ring keeps pushing out from the return adapter. Torquing to specified 22ft lbs. if I back off enough to get it to retract the o-ring, its well below required torque
Randy McNeil
Reviewed in the United States on April 3, 2024
I like everything about this hose set except the high pressure hose is clocked a little off for my application. Ended up curling the hose in different direction to get things aligned properly.
Kindle Customer
Reviewed in the United States on October 27, 2023
I ordered it for the 58 Chevy Truck that I am restoring. The fittings are perfect. It was shipped extremely fast. I have a ton of stuff from Speedway and have never been disappointed with the service or product.
james salveson
Reviewed in the United States on December 18, 2022
good deal
GERALD Hart
Reviewed in the United States on November 27, 2022
31 pontiac
DUNN
Reviewed in the United States on December 29, 2018
Worked perfect for a LS to a mustang 2 front end, the little brass piece has to be used for the hose to tightin up.