Your cart is empty.
Your cart is empty.Product Description
These are our 3rd Generation error free led turn signal light bulbs, come with all-in-one connection with better wiring decoder to prevent overheat, much safer compared to tradition load resistors.
All in one led bulbs
Our all new all in one led bulbs, just plug and play, no more extra resistors or decoder.
High power LED chips
Our high power LED chips are extremely bright, with projector lens they can produce wider view angle.
Error Free
Our LED bulbs are error free.
Heat-Resistant
Our LED bulbs decoder will not get hot.
Joe Griffen
Reviewed in the United States on February 26, 2025
Easy to install and has been working perfectly.
Saada
Reviewed in Canada on January 31, 2025
Works as it should.So far (31/JAN/25), working with no issues.Was easy to install, the Canbus cable took two three attempts to get it set in rear light assembly; in may case I would rather to have shorter but it is not a dale braker.Over all I'm good with the product, 5-STARS, thanks
Steve
Reviewed in Canada on January 19, 2025
These bulbs are a perfect option to replace old incandescent bulbs. They provide plenty of light and there is a significant brightness difference between clearance and turn function, which make these bulbs stand out between the countless other options available. The wiring looks to be good quality and the inline resistor doesn’t get super hot.
Valente Hernandez Sanchez
Reviewed in Mexico on January 16, 2025
Los focos quedaron muy bien en mi vehículo
Josh
Reviewed in the United States on April 21, 2025
Just as they advertised, nice and bright and no hyper flash
Fansler
Reviewed in the United States on April 12, 2025
Worked great in my 2013 Jeep Grand Cherokee Overland. You have to find room for the resistors however it is nice not having to cut into cablings to add your own resistors. It took a minute for the computer to register and get rid of the hyper flash so don't just take it out if it starts flashing. Connecting is rubber versus the twist on kind so you just need to press in to lock in place.
Zach L.
Reviewed in the United States on February 8, 2024
These brake lights are very bright and easy to install. It's a very simple plug and play. What impresses me the most is the seller's customer service. I bought these in March of 2023. Just recently one of the lights is only half way working. I contacted the seller and expressed my concern being that LED's are supposed to far outlast standard bulbs. Without hesitation or hassle, they replied the next day asking for my address so they could send me a replacement. It's hard to find a company who legit stands behind their product and takes care of their customers. I'm very happy and very impressed. Things happen regardless of product quality. It's hard to find a company with such superior service after the sale. Bravo!!
Bobby
Reviewed in the United States on December 26, 2024
I always go with this brand because of the design. I love the way they seal with the rubber socket and they do not cause hyper flash. They are very bright and worth the money.
Interested Customer
Reviewed in the United States on September 12, 2023
Just a plug and play installation, but is not the typical twist lock one would expect in a 3157 socket. More of a push in rubber boot system. It seems to stay in place, but as to dust and moisture proofing, it doesn't seem tight enough for that. Time will tell. Other than that, very bright, no hyper-flashing, and no error codes.
Edgar Rodríguez
Reviewed in Mexico on May 9, 2023
Quedaron muy bien en una Jeep Patriot 2012, tienen muy buena iluminación y son mucho más brillantes qué unos focos convencionales.
Gary (Camas, WA)
Reviewed in the United States on November 3, 2023
2010 Explorer V6. As advertised. Plug-and-play. I tried a couple of other red LED tail light "bulbs". They produced hyper flash and I wasn't in the mood to install resistor(s). So glad to find this LED stop/turn unit. No more hyper flash and no more dash light indicating problem with rear stop/turn signal bulbs. Considerably brighter than stock 3157 bulb. Too soon to attest to longevity. Well worth the money. Customer service answered my question within one-hour. Now that is amazing! Great purchase and great product. Will now search for non hyper flash amber LED for front turn signals.UPDATE Dec 5, 2023: Received [11/2/23] and installed [11/3/23]. One bulb/light/harness/resistor failed two days ago and unit went to hyper flash. So, it lasted about 25-days. I wonder when the other bulb will fail. I'm 2-3 days over the 30-day refund policy. Will now look for an alternate error free canbus units.
Stephen
Reviewed in the United States on July 6, 2021
I bought these somewhat out of necessity. I have a 2002 Ford Focus station wagon, and notoriously and for some reason Ford engineered the plastic on the tail light assemblies on these to not be able to withstand the heat of a standard incandescent bulb over the years. The back of the housings where the twist-in 3157 sockets go in as well as the sockets themselves melt and warp and fuse together. It is such a pain. The last time I had to change a bulb, I ended up having to break things, so the socket never stayed in the way it was supposed to. I lashed the sockets in with mechanic's wire. Well, they still moved a little, and sometimes when I would hit a bump or close the hatch a little too hard it would break the bulb or the filament inside the bulb. I got tired of eating through bulbs, so I sprung for some new tail-lights and these LED bulb replacements. They fit PERFECTLY with the semi-universal rubber grommet fitment. They also produce a fraction of the heat of an incandescent 3157, even the housing of the resistor only gets mildly warm! (I have a theory that the resistor is only wired into the turn signal circuit so it probably only gets current and therefore heats up when the blinker is on). Also, man are these things bright! If I get rear ended with these things for brake lights I'll be pissed lmao. I also like that the load resistor to prevent hyperflash is wired right in out of the box and that I don't have to try to solder one in myself. I can't speak for longevity, but they seem very well made and considering the lack of heat production I think they will last quite some time. I'm now considering a mod where I replace the grille that contains the amber front turn signal lenses with an aftermarket one with clear lenses and getting this same company's "switchback" 3157s, so that they'll be white when they're on, much like those LED DRLs that are so popular on new cars, and will then flash amber when I put the turn signals on.
Sheldon
Reviewed in Canada on August 10, 2020
The media could not be loaded.
Recommended Products