Your cart is empty.
Your cart is empty. WHY BUY OUR Pipe Tee ?
Choosing accessories for your pipe fitting tools? You can finally stop buying expensive stainless steel pipe fittings, unreliable copper pipe fittings that rust so easily, and plastic plastic hex pipe fittings that break quickly and are unreliable. The best choice you can make for your project is to utilize brass pipe fittings. These fittings are:
- durable (thanks to premium brass construction)
- resistant to corrosion
- solid
- do not leak
- have a better thermal conductivity and a low magnetic permeability
- do not deform with time
- provide tight sealing thanks to the relative softness of brass
- are easily installed or changed (thanks to the hexagonal head that increases the bearing surface when a wrench is applied to the fitting).
Our Tee Pipe Adapter with well-machined male NPT threads on one end and female NPT threads on the other end are a great fit for connecting pipes. They provide the maximum fitting of the connected parts of the pipes. Also, it’s possible to repair any damaged part of a pipe with the help of our threaded reducer:just cut out the damaged part, place threads on both ends (these should be connected) and adjust it with pipe adapter fittings.
Bonus:
- this bushing adapter can be applied for various measuring devices and collectors
- it will also come in handy in case you accidentally damage any pipe threads: again, just make a hole, cut the threads and then install the pipe fittings
Note: Please be careful when choosing the size of the pipe fittings for your projects. The size is not the same as the diameter of a pipe. For the pipe with male threads, measure the outside diameter of the largest surface with the threads. For the pipe with female threads, measure the top diameter of the thread.
Jürgen Nölke
Reviewed in Germany on May 1, 2025
Das T- Stück ist leider zu klein kann ich nicht verwenden, ist 1/2 Zoll brauche 3/4 Zoll.
Chris K.
Reviewed in the United States on May 12, 2024
As advertised. Worked fine!
John Quargnenti
Reviewed in the United States on March 3, 2024
I couldn't get the threads to stop leaking . I had to order another brand
KS
Reviewed in the United States on September 23, 2023
No matter what I do, it is leaking.
Mike Powers
Reviewed in the United States on March 17, 2022
Quality brass fitting, exactly what I expected. An extremely hard to find fitting at hardware stores. Not so hard to find with Amazon
Joel
Reviewed in the United States on February 4, 2022
Leaked! Had to tape and dope to seal. Lots of burs on male threads.
John Krueger
Reviewed in the United States on September 1, 2021
Not what it said it was
nervous geek
Reviewed in the United States on July 6, 2021
This fitting leaked at all three joints for me. Note that in the third picture it states that for 1/2" wrap the threads with 7 to 10 turns of tape! Bigger sizes even more! I have never used that much tape on a NPT fitting. I ordered a different tee fitting for a couple of dollars more and all three fittings were clearly marked as NPT. Guess what? Two turns of tape and not a drop of leakage. Don't rely on many wraps of tape for long term no leak fitting is my recommendation. I ended up putting the tee into recycling.
Gloria K
Reviewed in the United States on January 31, 2021
This tee leaks a lot. The threads are very rough. I ended up putting rubber o-rings on the tee to stop the leaking at the fitting joints. I needed it working now otherwise I would have returned it.
Recommended Products
