Your cart is empty.
Your cart is empty.Product Description
Suitable and Incorrect Headrests
The car tablet holder is suitable for most car models, but some models without headrest poles are not suitable. Please note that
360 Degree Rotation
The car tablet holder can rotate 360 degrees, which is very suitable when you need to adjust the direction of the tablet
Clamp and Headrest Height
The width of the fixture is 0.6 inches, and the height of the headrest rod needs to be at least 1.4 inches to ensure optimal installation and use
Gina
Reviewed in the United States on May 26, 2025
I did see the suggestion to measure your headrest posts, and I measured my front headrests. However, I wanted to install this on my rear headrests and learned that they are not the same width! This mount will not fit on some more closely-spaced poles. However, the build quality on this mount is good and it did arrive as described and I can recommend it.
Cargilper
Reviewed in the United States on May 24, 2025
We used this tablet holder on a recent car trip, and it made such a difference for keeping the kids entertained (and the parents sane!). It was super easy to install. It took just a couple of minutes and didn’t require any tools, which is a huge plus when you're trying to get on the road quickly.What I really love is that it’s retractable. When we’re not using it, it tucks neatly out of the way so no one is bumping into it or having it hang awkwardly between the seats. The adjustable arm and 360° rotation made it easy to find the perfect viewing angle for each of my kids, and it held our tablet securely even on bumpy roads.The build feels sturdy, and it fits everything from our iPad to the kids' smaller devices. It’s definitely one of those travel essentials I didn’t realize we needed until we had it and now I wouldn’t go without it on long drives.Highly recommend for any family road trips or everyday use. It’s a perfect solution for backseat entertainment!
Orlando
Reviewed in the United States on May 24, 2025
I bought this tablet holder for my Ford passenger van so my kids can enjoy their favorite cartoons and movies during long road trips. Feels strong and durable, and the whole mount stays solidly in place, even on bumpy roads. It holds my 10-inch Samsung Galaxy tablet with no problem at all. Installation was quick.Highly recommend!
Sandra H.
Reviewed in the United States on May 23, 2025
Product arrived nicely boxed and is giftable. It feels sturdy. No directions but it comes in only two pieces and you simply push the approximately .75" balled joint into the receptor. You will need to unfold the parts to see it. The clamp that holds your device is strong and held both an iPad and an iPhone. There is a lot of flexibility in the piece that goes between the two bars at the back of the seat. It works similar to a spring curtain rod. However, it was about 1/2 " too big for my 2015 Subaru Forrester headrest. It does not sit horizontally, just at an angle. However it still feels secure enough to use. It just might bug some people, so be sure to check the inside width between the headrest bars. Mine are 4". Totally adjustable for horizontal or vertical and for visibility with the back seats. I was not able to use it with my folding iPad case. I like the product. Recommended.
wildcatsarahj
Reviewed in the United States on May 17, 2025
Great addition to the car for my 8 year old to hold her tablet on car rides! Easy to set up and stable for riding in the car.
SP
Reviewed in the United States on May 14, 2025
This work perfectly with both our iPad and our Samsung galaxy tablets. We drove across the country and these clipped perfectly on to our F150 headrest and held the tablets steady so the kids could watch shows without kinking their neck. They help with good posture keeping them at eye level. Made with quality material and is able to extend out and even tilt and rotate for different heights.
K. Jacobson
Reviewed in the United States on May 12, 2025
This tablet holder seems to be well made, and I was pleased to see that it grips an 10.9" iPad with its case on. However, it does not fit my car. The product description should have put a LOT more emphasis on the headrest pole measurements. If you read through all the text, it states "Installing it on headrest poles with a distance from 4.2 inches (10.7cm) to 5.7 inches (14.4cm) is a breeze." If you are driving a 2017 Impreza with headrest poles 3 7/8" apart, you cannot use this product.In a not unrelated note, the stability this stand will provide is dependent on the spring tension between the two plastic pole grips. I would be worried that, over time, the grip could loosen, resulting in movement in the arm holding your device while on the road.In any case, I'm not able to road-test this product. I see there are other positive reviews, which is great. My gripe is that there should have been an obvious warning - DOES NOT FIT HEADRESTS WITH A POLE DISTANCE OF LESS THAN 4.2 INCHES." Also, is that measured from the center of the pole, or is it from the inner edge of each pole? I'll leave that to you to figure out!
Recommended Products
$97.49
$ 46 .99 $46.99
$75.99
$ 33 .99 $33.99
$97.99
$ 47 .99 $47.99