Your cart is empty.
Your cart is empty. Features:
A kit of temperature detector, consists of a thermometer with LCD screen, frame, and waterproof probe. A thermometer (digital/ dial) promptly monitor temperature of the PC water cool system. 4 pin power supply interface, easy to install. Highquality and , work well in 50~110 temperature.
Specifications:
Type: Digital Thermometer/ Dial Thermometer (Optional)
Monitoring Range: 50 ~110 degrees
Voltage: 5V 24V
Interface: Big 4P
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Thermometer Size: Approx. 45.89 * 25.11 * 16.90mm
Package Weight: 75g
Package List:
1 * Thermometer with Probe
1 * Frame
conscript
Reviewed in the United States on May 17, 2023
I had high hopes, but you get what you pay for. To begin with the sensor was covered with some rubber/silicone substance that had to be cleaned off, then the g15 fitting threading was covered too. Scrsoed between the threads and still had difficuty screwing into the g15 hole. In the end it leaked, so i just removed it and threw it away.
BuddahChief
Reviewed in the United States on October 15, 2022
No headers at the pcb, solderd connections. The molex power banana plugs are very wobbly. I would have liked to see them set, even if with just some hot glue. Ketchup has to be covered up, but that can be done easily enough. The acrylic stands look nice, I mounted my displays with double-sided instead, but I will be keeping them around just in case. Plenty of wire length, for power and more than enough sensor wire length to reach anywhere even in a full tower. Screeen color is true and sharp. Over all a very solid buy at $12 if you are just after a basic temp readout, it can look dang good also.
James
Reviewed in the United States on March 5, 2021
Looks good, easy to install. I'm not monitoring water temp, but installed in my case to monitor ambient air temp because why not. Eventually plan to dremel out a section of the GPU riser and install the screen in it which will look super clean. Only think I wish was that the wires came straight out of the back and not the side so they can not be seen.
Justin berry
Reviewed in the United States on October 11, 2021
May leak at the sensor, as mine did, if it does just hot glue or silicone it in place.
Bubble Gum Guru
Reviewed in the United States on January 24, 2021
I added two of them to my system so I could monitor the water temp going in to the cpu water block and the temp coming out of the rad. They work really well and they are a good price for what they are. I would recommend them to anyone who might need to monitor the temps on your custom water cooling.
Jake
Reviewed in the United States on December 8, 2020
Awesome product for the price. I bought it because I thought my temps were bad and wanted to check. Was really easy to install, the screen isnt too bright and distracting, and the bracket has 2 holes pre-drilled so you can mount it in a bunch of places. My only complaint is that one of the molex wires is red.. I would have liked 2 black wires. Definitely not a deal breaker to me though. Second pic is to show size in my Fractal Define S2 case
Marshall J
Reviewed in the United States on November 30, 2020
Worked as expected, connect and go.
ThisGuy
Reviewed in the United States on October 26, 2020
Works as indicated.I have read a few reviews surrounding the topics of this temp gauge and leaks, thread tape, and the like...This is best when used with G1/4 threaded female holes. If you don’t know what yours is, or just know “quarter in” this is not for you. This does not use thread tape or any solvents.I have installed this to track my temperature in my liquid cooled pc.Installing was as easy as plugging into open bay.I wanted to be able to compare this to the AMD software. There is less than 1 degree of difference between this and my software, this would indicate that either this temp gauge is correctly functioning, or that both this temp gauge and my multi thousand dollar custom built PC is garbage.In short.. but this, it works.
Recommended Products