Your cart is empty.
Your cart is empty.CT120 EX ARGB Sync is a new model of the CT series incorporating the new MagForce 2.0 for a better, quicker magnetic connection among fans. MagForce 2.0 features larger Pogo pin contact pads, reducing faulty alignment during fan connection and enhancing installation efficiency. CT120 EX ARGB Sync fans maintain the 2000 RPM fan speed and have broken through its series limit to generate 68 CFM of airflow and 2.95 mm-H2O static pressure while maintaining a 28.5 dBA noise level. CT EX Fans also features 9 addressable LEDs for users to build up spectacular lighting effects through motherboard sync software, providing great coverage of 16.8 million uniform colors. Users can create stunning lighting effects through your motherboard software to customize your ideal lighting effects. •P/N: CL-F181-PL12SW-A •DIMENSION: 120 x 120 x 25 mm •STARTED VOLTAGE: 5 V •RATED VOLTAGE: 12 V & 5V •RATED CURRENT: 0.19 A & 0.32A (one fan) •POWER INPUT: 2.28 W & 1.6W (one fan) •FAN SPEED: PWM 500~2000 R.P.M •MAX AIR PRESSURE: 2.95 mm-H2O •MAX AIR FLOW: 68 CFM •NOISE: 28.5 dB-A •BEARING TYPE: Hydraulic Bearing •LIFE EXPECTATION: 40,000 hrs,25℃ •CONNECTOR: 2510 - 4 PIN PWM ; 5V ARGB header - 3 PIN •OTHER: Fan Frames x 3 ; Cable x 3
DM
Reviewed in Australia on March 25, 2025
A bit expensive but worth the money
Franklin R Allen
Reviewed in the United States on March 19, 2025
The magnetically aligning pogo-pin connectors used to join multiple fans together make installing multiple fans much easier than you think. First, fewer cables to manage. Second, the magnets are strong enough that once you have one fan mounted, the magnets will hold up the next fan for you to set the screws. I am never going back to traditional wired fans.
Roy Q
Reviewed in the United States on February 7, 2025
I originally had normal fans located at the bottom of my case, but it always bothered me how the majority of the RGB was being lit underneath. I also wasn’t happy with the support arms of the fan being so visible. These reverse fans solved both of these problems for me. They look much better and provide plenty of airflow.Noise levels are what you would expect from a triple fan set up. I don’t find them any louder or quieter than other fans. I normally run them noise normalized so not a problem for me.You may have heard that some performance is lost with reverse fans, which might be true however, I would say it is negligible.If you’re looking to have a better visual experience with your build, I would highly recommend these fans. And so far they appear to be quite good quality.
samdrucker
Reviewed in the United States on February 5, 2025
The media could not be loaded.
Andrew
Reviewed in the United States on February 18, 2025
One of these fans made an awful noise when it reached a certain RPM, out of the box. Fan position didn't make any difference neither did the screw tension, so I tried to RMA the one fan with thermaltake. They wanted ME to pay 16 dollars to ship it in a box, otherwise if there was any damage during shipping they wouldn't replace it. This is essentially the entire value of the fan. They wouldnt budge at all. I ended up having to return all 3 to amazon, and had no fans to use in the meantime on my new PC. Won't be buying thermaltake again.
Tyler
Reviewed in the United States on February 10, 2025
The media could not be loaded.
William
Reviewed in the United States on April 4, 2025
They work great and quiet they are not even out of the box yet.
D3
Reviewed in the United States on December 24, 2024
I love these fans. Used them together a 360 cooling brck and the innovative magnetic connection saves all problems with running of fan or aRGB wires. Incredible product. Very quiet, crisp color. Strongly would recommedn these fans.
Frankenstein's Monster
Reviewed in the United States on December 20, 2024
Magnets are solid, straight forward install. Seems like the folks before didnt plan their build accordingly or are not familiar with extension cables to accommodate.Fans work well, bright LED, noise level is moderate, no complaints.4 stars instead of 5 because it doesnt include a module to adjust the LEDs.
shuragrey
Reviewed in Mexico on December 18, 2024
Llegaron a tiempo y la calidad es exelente premium no lo dudes comprarlos
Vollezar
Reviewed in Canada on October 28, 2024
At about 45% and higher the fans become very loud. I have them setup as intake fans in the Antec C8 case, on the side.Up to 35% they are very quiet, at about 35-45% it's not so bad, 45% and above the noise is terrible.I have the 140mm versions of these fans set as intake at the bottom of the case and they are much quieter. I have those running at 65 - 70%, when I am working, and the noise is not all that bad. But these ones are just ear piercingly loud.
Loftaris
Reviewed in Canada on October 24, 2024
These fans can only be mounted one way because the mounting holes only have threads on one side, so instead of mounting them where I've mounted countless other fans in the past, these ones had to be mounted on the opposite side.The screws they included are too big, this is the first time I've had this problem with included screws, thankfully I used my old screws from the previous fans and they worked just fine. They also included long tiny screws which don't fit the holes, if you somehow manage to use those (with your own nuts because they don't supply nuts) the fans are loose and rattle.I expect much more from a company who's been around for awhile.
Erik
Reviewed in Canada on October 12, 2024
I somewhat like the fan to fan connection in most situation. But, it can be limiting cause you can't turn fans 90 degrees unless you add another connector and if you do why pay more for daisy chaining your not using.The connectors are quite bulky which can cause fitment issues in some cases and on some AIO tubes. The fans seem high quality, but this daisy chain implementation could be better.No hub included, no short wire fan to fan connector like other similar products.
Recommended Products
