Your cart is empty.
Your cart is empty.Product Description
230-14 Mid Tower PC Case, Designed for Creators
This case is compatible with ATX motherboards and supports up to 16 hard disks for video editing, 3D modeling, and animation production. Pre-installed with 4 x 120 mm fans, this case allows for additional fan installations up to 7 x 120 mm fans or 5 x 140 mm fans + 1 x 120 mm fan.
Neat Cable Ruoting
Aidan
Reviewed in the United States on June 1, 2025
I built a home server out of an old PC that I had lying around, and that was good, but because it was an old PC, the hardware was not good, and the old case was not meant to be for a server. I am not ready to upgrade to a huge home server, as I am not a power user yet, but I did want to upgrade because I wanted to add a few more hard drives. When I found this case, I knew I had to try it because it felt like it was made exactly for what I needed it for!This case was pretty easy to put together. It's very large, and has a lot of storage for hard drives. The quality is a bit low, and you can tell that this is a cheaper case overall. But it's not terrible, and once it's all put together, you can't really tell.I am very happy with this case and I plan to use it far into the future, especially with how much storage it can hold.
Neal
Reviewed in the United States on May 25, 2025
The media could not be loaded.
Philip
Reviewed in the United States on May 20, 2025
The Vevor PC gaming case is a well designed and affordably priced mid-tower chassis that accommodates ATX, micro ATX, and ITX motherboards. I had not used a Vevor case before but had a positive experience with their thermal printers, so I decided to test this one. I was impressed with the machining quality and overall construction. The metal panels fit together cleanly, and the tempered glass side panel provides a clear view of internal components without any alignment issues.The airflow is effective due to the six included 120 millimeter PWM ARGB fans, which are preinstalled and configured for both intake and exhaust. These fans are bright, quiet, and responsive to motherboard controls. Cable management is straightforward with adequate space behind the motherboard tray and multiple anchor points for cable ties. This helped achieve a clean build with minimal effort.I installed an AMD Ryzen processor along with a full-sized graphics card, and there was sufficient space for the GPU and cooling system. The maximum GPU clearance is generous at 410 millimeters, and the front I/O panel provides accessible and responsive ports.This case is a suitable choice for builders seeking performance and aesthetics on a reasonable budget. Based on the quality of materials, thermal design, and included features, I recommend this Vevor case for your next build.
Shire23
Reviewed in the United States on May 12, 2025
Item Reviewed: VEVOR PC Gaming Case, Mid-Tower, Computer Case with High-Airflow Tempered Glass Panel, Dust Filter, 6 x 120 mm PWM ARGB Fans, Easy Cable Management, for GPU up to 410 mm in Length, for ATX/M-ATX/ITXThe Good- Love the “fish tank” design this case presents with no bezel on the front corner.- USB-C on the top is nice.- Plenty of space for cable management.- Fit my RTX3060 with plenty of room to spare.- Included RGB case fans look nice. However, their PWM and RGB cables are a bit short and difficult to manage because of this. It works, but not the ideal cable management I would like.The Not-so-good- What you get with this case is very basic - a few zip ties, some screws, and a fewmotherboard standoffs (I had to add a few of my own).- All fans came preinstalled as exhaust. I had to reverse some to balance out air flow.- The open side of the case does not have a dust filter on it. Air flow should be cool in the bottom and warm out of the top. However I have to have this reversed for this case because the only dust filter is on the top. I would rather reverse the air flow than to straight up suck dust inside of my case.- The expansion card slot covers on the back are one-and-done. Once you pop the cover off of the slot it doesn’t go back on. Most cases I’ve seen will have reusable slot covers that screw on.- The hard drive cage has two screws on the bottom of the case that have to be removed before you can slide the cage out. This makes no sense whatsoever.- There’s only room for one HDD and one SSD to be screw mounted.ConclusionOverall, I’m pretty impressed with this case at this price point. The “fish tank” design of it is my favorite part because the lack of a bezel on the front corner really allows you to show off your work inside your PC. It’s not quite as heavy as my Lian Li case but I’m finding I like this case better than my Lian Li. I really wish they would have included a dust filter for the side panel so that could be properly used for intake without loading your PC up with dust. Having a USB-C port on the top panel is pretty handy because my Lian Li case doesn’t have that and my Z590E motherboard only has one USB-C port on the back. I’m glad I snagged this and would recommend to others looking for a solid case at this price. Well done, Vevor.Here is how I rate items:5 Stars = Exceeds all expectations; a must have!4 Stars = Very good find, you should check it out.3 Stars = It works and functions as advertised. Nothing more, nothing less.2 Stars = Proceed with caution. May work for you but do your research.1 Stars = Avoid this product, not worth the effort.
Kevin
Reviewed in the United States on May 11, 2025
Excited to get my next build put together using this! I love the fish tank look and I want to be able to look at all my components inside whenever I want and enjoy the vomited rainbow beam out of the crystal clear case.I have a spare CPU cooler as I'm not a fan of water cooling the cooler is really really large and is honestly kind of hard to find cases it'll fit comfortably in however this case leaves about 1&1/2 inches from the glass to the top of the cooler which is super nice as I'm not worried that my measurements were off and I assemble a whole setup with it just to realize I can't even close the case.The fans are not loud at all but they're not whisper quiet, I'd say their mid tier on how quiet they are. I can't really hear them most of the time unless I focus on the sound.There's tons of room for cable management and for PSU's whether you're a bit more tidy or just want to connect everything and just kind of tuck the mess away and out of view this case should have you decently covered.This tower feels pretty solid and durable incase you're moving it around and end up bumping into something I don't think you'll have to worry about damage to the glass outside of maybe a scratch vs shattering.I feel this is a great tower for the cost I would highly suggest this case if you're looking to change up your old case or build a new rig!
Recommended Products