Your cart is empty.
Your cart is empty.Product Description
The VIS-3000 is a standard sized outdoor keypad used for access control. This keypad will allow up to 1000 users through either of the four access options. On the keypad, you will notice a doorbell towards the bottom. This will allow people from the outside to ring the doorbell and notify those inside that there is someone wanting to come in. Once someone has entered a programmed code, card, or tag, the locking mechanism will disengage and allow for entrance.
MINI CONTROLLER
This keypad comes with the VIS-MINI-CNTRL. This device is a mini single door control panel that can work with any Wiegand 26~37 bits output reader. It uses Atmel microcontroller to assure stable performance, and it is equipped with an infrared remote control for easy operation. The VIS-MINI-CNTRL supports 1,000 users.
For better security the VIS-MINI-CNTRL needs to be installed inside the facility in a restricted area. This device becomes the hub of this standalone application and all the credentials are being stored on the device while no information is stored on the reader itself. Additional recommendations for added security is to add the controller within an enclosure.
VIS-MINI-CNTRL Features
- Can connect with any reader with Wiegand 26~37 bits output
- Can connect with any keypad reader with 4bits, 8bits (ASCII), or 10bits virtual number output
- Support Master Card function
- Low temperature resistance (-40°C)
Keypad Features
- Ultra-low power consumption: Standby current is less than 30mA.
- Input & Output: Wiegand26. Searching Time: Less than 0.1s after reading card.
- Backlight Keypad: Easy to operate at night.
- Doorbell interface: Support external wired doorbell.
- Access ways: Card, code, card+code. Independent codes: Use codes without related card.
- Change Codes: Users can change codes by themselves.
- Anti-tamper alarm: Alarm is activated after tear down illegally.
- Delete Users by card NO.: Delete card NO. by keypad to eliminate security risk completely.
- Waterproof Rate: IP68, indoor or outdoor use.
Specifications
- Input Voltage: DC 12V
- Idle Current: ≤25mA
- Card Reading Distance: 2 – 3 cm (0.78 – 1.18 in.)
- Card Frequency: 125KHz for EM // 13.56MHz for Mifare
- Keypad Transmission Format: 4bit, 8bit and Virtual card number
- Operating Temperature: -45°C ～55° C (-49°F ～131°F)
- Operating Humidity: 0%～95%
- Product Size: 118Lx81Wx21H (mm) – 4.64Lx3.18Wx0.82H (in.)
- Protection Level: IP68 – No ingress of dust; complete protection against contact (dust tight), and waterproof
Ernesto B. - AGM Marketing
Reviewed in the United States on February 22, 2022
I ordered the whole EM lock set a while ago and had a technical issue and I called them up and cleared up the problem right away.
Smells_Like_DC
Reviewed in the United States on March 27, 2020
Keypad works great. John at FPC just spent nearly an hour with me on the phone helping me get going with the software. We was knowledgable, patient and friendly. I can't recommend them enough.
Carter Hatch
Reviewed in the United States on November 17, 2020
This keypad is well made and works great. FPC Security was very helpful and kind. Great Customer relationship. Looks nice on the wall and is easy to use.
Josh
Reviewed in the United States on June 25, 2017
Most touch screens and touch pads have terrible sensitivity and require a bit of force to register; this device is sensitive enough to pick up just about any skin contact, even accidental grazing. Build quality is likewise exceptional. The only issue I had was with the included instructions. They're anything but clear, and were obviously poorly translated. I had to watch a few YouTube videos I stumbled across in order to successfully program it as a standalone unit.
Recommended Products