Your cart is empty.
Your cart is empty.Product Description
Durable plastic material 120x120x25mm
- Rated Voltage:12V
- Rated Current: 0.15A
- Speed: 2000RPM
- Air flow: 66.7CFM
- Noise:28dBA
- Bearing type: Sleeve Bearing
Fan Filter
- Protect your fingers, and keep fan blade without damage ; wear-resistant and not easy to break.
Connecter: 2Pin
- Connecter: XH2.54-2Pin
- (+): Red Wire ;
- (-): Black Wire
RV Refrigerator replacement fan
They can happily cooling the back fins of the RV refrigerator , moving the air! Qr can be DIY mount these replacement fan in the fridge of rv directly to the cooling element to help it work better and prevent frosting.
Ice maker fan
Replacement fan for Ice Maker Machine Countertop, Electric ice Maker and Compact Potable ice Maker Perfect for Home/Kitchen/Office.
Pc case fan
Replacement fan for pc case , little nas and home video entertainment system cooling.
Connect the fan’s 2-pin connector to a free fan header on the motherboards or directly to the 12V power supply.
for projector cooling
A projector cooling fan is a device specifically designed to dissipate heat generated by a projector. It is typically installed within the projector housing or near the ventilation system.
for PSU replacement
The primary purpose of the PSU replacement fan is to provide efficient cooling for the PSU to maintain its optimal operating temperature.
for Incubator
An incubator fan is a compact fan specifically designed for use in incubators. It operates on either DC power and plays a crucial role in maintaining proper airflow and temperature regulation within the incubator.
Thats Jushu
Reviewed in Canada on May 15, 2025
Change an psu fan and those work really well
keduMINI
Reviewed in the United States on May 14, 2025
These appear to be working diligently to cool my air compressor baffle box. One of them is used as an inlet fan and the other is used as an outlet.
TNBreeze
Reviewed in the United States on May 10, 2025
This item was a perfect replacement. I used it to replace the cooling fan in bottom of upright drink cooler. My drinks were cold again. It hooked up just like the old one I took out. Very easy to replace.
Jacob
Reviewed in the United States on February 10, 2025
Bought this to replace that fan in my 850w NZXT brand PSU that I've had for maybe 11 years now. My original fan had developed a rattle. I didn't want to replace the power supply as it was fine otherwise.The specs for my fan were 0.5a and 2500rpm. This fan was the closest I could find on Amazon to the original spec. It works perfectly. Even though it spins a bit faster it is pretty quiet. No louder than my original anyway.Solid buy.
Ilya Rogers
Reviewed in the United States on April 3, 2025
They move good amount of air and are relatively quiet.
Customer
Reviewed in Canada on April 14, 2025
Facile d’installation
Judy
Reviewed in the United States on August 4, 2024
We got this to replace a fan in a mini fridge. Works beautifully, installed in minutes, quiet running. Came in a two-pack. Good value!
Customer
Reviewed in Canada on August 28, 2024
A1
E
Reviewed in Canada on May 11, 2024
What can I say? Quiet, work as advertised, blows air
Tom A.
Reviewed in the United States on December 30, 2024
I bought this fan to see if I could fix a portable dehumidifier. It turned out to be a circuit board failure, so I didn't need it after all. However, the kit is well equipped, that fan seems to be decently made, and the harness connector fit properly.
Customer
Reviewed in Canada on November 18, 2024
Strong airflow, low noise level, amazing quality, multiple functionality and fits perfectly. Highly recommend.
G. Potter
Reviewed in the United States on April 12, 2024
I needed 4-pin fans for a PC build - now here I am a few months later looking for quieter ones.(Update) At full speed, the fans reach 2560 - 2580 RPM (Spec says 2500) But the blade design isn't allowing for maximum air movement - so they are making more noise than they should beOddly enough - I think the airflow direction arrows are missing? This is really a bad show in my opinion.I may try to lift them off of the case grill as this could be causing air friction.Update - The manufacturer reached out and offered a refund, which I declined. Nothing 'wrong' with these fans, they just need some updating / fine tuning.
BeMeC
Reviewed in the United States on October 23, 2023
High quality product that was a good value. I got this to replace the fan for my opal ice maker. It worked great. I did have to change out the plug with the original, but instructions were included for that. The fan have nominal noise. The picture attached shows during installation.. The old fan is on the bottom right. Very satisfied with the outcome
Recommended Products