Your cart is empty.
Your cart is empty.Product Description
Detach Adjustable Plug-In Driver Backrest Mount kit with Storage Pouch
Fitment List:
Fit 2010-2017 Victory Cross Country, Cross Country Tour & Magnum Models
Fit 2010-2014 Victory Cross Roads Models & 2012-2013 Hard-Ball
Specifications:
- Easy Bolt-on Application. Design by using the existing fender bolts.
- Height Adjustment,Quick Detach.
- Material:Pu Leather Backrest Pad with Sponge,Heavy Duty Steel Mount brackets.
- Come with Storage Pouch.
- Package Included: 1xDriver Backrest Set. Come with installation instruction.
Buyer shows
lawman1
Reviewed in the United States on May 6, 2025
Excellent fit and function for my 2014 Victory Cross Roads. The instructions are almost completely useless. I like that there is alot of adjustment because I ride with tall bars so being able to have it lean quite far forward was a must.
Mr. Williams
Reviewed in the United States on April 3, 2025
Product base came pretty assembled,,backwards!Be sure to loctite ever screw you want to keep,i lost my rest height adjuster first ride..had to make a new one(big Allen head in the middle..)
Mark S Bowley
Reviewed in the United States on May 22, 2024
Completely disappointed. Nothing about the unit is “quick release”. You have to take the bike seat off to adjust anything or remove the bracket. If you want to remove the back rest and leave the bar sticking up you still need an allen wrench and socket.Instructions are useless. 1 sheet of instructions, starts at Pic 2 and mentions step 12.. wtf.. no other steps mentioned. Bolts it came with are an inch too long even with the spacers. Luckily I had some spare bolts that fit.
Dustyn F
Reviewed in Canada on September 10, 2023
My backrest was packed well and looked good quality upon taking out of the box, however it was missing hardware. I was missing at least one set of washers that attaches the backrest to the post, see photo of some washers I had laying around that (luckily) worked. Install is straightforward but the instruction sheet is basically useless minus orientation of the bracket. As other reviews have said, there is nothing “quick release” about the unit. You either have to back off the set screw so much that the backrest is unstable (to be able to remove it once the seat is on) or you tighten up the set screw fully (as I did) and now have to remove the backrest pad itself if you want to remove the seat. It seems fairly comfortable but time will tell. Once I put on some more Kms, I will update the review.The rear pocket is all but useless and gets in the way when installing the backrest pad. I’ve had the seat on and off a few times to adjust the angle and distance the pad is from my back. I agree with other reviews that the post is about 2 inches too long. For what it’s worth, my backrest is in the lowest position in the photos
Albert Rodriguez
Reviewed in the United States on August 30, 2023
Love this back rest, makes my harley look unique!
Paul C Frech
Reviewed in the United States on November 3, 2021
Bought this with some apprehension but very happy with the purchase. The hardware included must be for more than one model. Used the long bolts to replace the factory ones that keep the strap plate in place. Used the spacers and installed with the strap plate back under the seat. It does have a VERY slight forward backward angle adjustment in the base but the backrest itself swivels. You can adjust the set screw that locks the rise of the backrest so that you can adjust that up or down. I imagine after a while that will come loose so may need to be reset or you will loose up/down adjustment and it would be down all the time. Back support in lowest position is very good on my lower back. I am 6'0" / 240lbs and feels sturdy. The instructions are basic but knowing which way to position the mount on the bike is there and the order of washers/spacers is there. Definitely worth the money so far. Will amend after some riding if any issues.
Ernesto Alvarez
Reviewed in the United States on November 10, 2021
The back rest sits too high, but is well made. I'll eventually have the support bar cut down.
Knucklebuck
Reviewed in the United States on August 25, 2020
I had to reassemble from the factory (it was assembled backwards)I ended up cutting off two inches of the upright to get it to rest against my lower back (I'm 6'2")there's nothing quick release about it.I'm glad i saved money and went the generic route, but it I knew I would spend time modifying it? I doubt I would purchase again.
Paul Hayden
Reviewed in the United States on October 19, 2020
The backrest was easy to install and provides the back support and comfort I needed.
Recommended Products