Shopping Cart

Your cart is empty.

Your cart is empty.

X-Ray Apron Rack (Wall Mount) - 5 Arms, Right Swing

5.0 Write Review
Free shipping on orders over $29.99

$220.00

$ 93 .99 $93.99

In Stock

1.Size:Left Swing


  • Colortrieve RIGHT swing arm wall rack features 5 chromium plated pivoting hanger arms, which swing to the right & flatten out nearly 180 degrees for space saving/storage behind doors or equipment. Capacity: 5 lead aprons. Total Weight Capacity: 110lb.
  • Right Swing. DIMENSIONS: Arms extend perpendicular from the mount/wall 22-1/2" at the maximum point. Arms: 25-1/2" left to right, when stored flat. Total Height: 10" (when flat from bottom of plate to highest point of swing arm/hanger. Arm height: 6-1/2". When flat the highest point from the wall (mounting bracket) is 3"
  • Mounting materials/hardware not included. Overall Plate size: 6"W x 6"H. Dimensions on mounting plate: Pre-drilled mounting holes are configured as follows: 5-1/4" apart Horizontally (3/8" from side edges). 2-3/4" apart vertically (Left top & bottom holes/Right Top & bottom holes are 1-3/4" from corresponding edges).
  • Properly storing your lead aprons will extend the useful life of the apron by helping prevent damage to the lead lining & the exterior fabric of the lead apron. Aprons should never be folded or creased. Lead aprons should be hung up by the shoulder(s) or on an approved apron hanger. Aprons should not be stored on a flat surface. Even incorrect storage for a short time can result in damage that is not visible to the naked eye.
  • Products are guaranteed for one year from the initial date of purchase for defects in material and workmanship. Proudly contains American made parts or partly assembled in USA. Distributed by a Veteran Owned Small Business.


The 5-Arm Lead Apron Wall Rack offers excellent storage capacity. The heavy duty metal rack holds up to 5 aprons on 5 arms to a maximum suggested weight of 110 lbs. It features five chromium plated pivoting hangers which can flatten out nearly 180 degrees. It's great for storage behind doors, equipment, etc. It is available with arms swinging out either left or right.
Dimensions:
Arms: Extend perpendicular from the mount/wall 22-1/2" at the maximum point
Arms: 25-1/2" left to right, when stored flat
Total Height: 10" (when flat from bottom of plate to highest point of swing arm/hanger
Arm height: 6-1/2"
Overall Plate size: 6"W x 6"H
When flat the highest point from the wall (mounting bracket) is 3"
Dimensions on mounting plate:
Pre-drilled mounting holes are configured as follows: 5-1/4" apart Horizontally (3/8" from side edges)
2-3/4" apart vertically (Left top & bottom holes both are 1-3/4" from edge)
2-3/4" apart vertically (Right top & bottom holes both are 1-3/4" from edge)
Mounting materials/hardware not included.
Proudly made in the USA and distributed by a Veteran Owned Small Business.