Your cart is empty.
Your cart is empty. Specification:
Voltage: DC 0-24V
Style: L-shaped
Suitable for: RGB 5050 LED strip light
Width: 10mm (4-PIN)
Max Wattage Support: 72W
Working Temperature: 0~40℃
Storage Temperature: -20~60℃
Installation :
1.Open the connector using a tool with a thin edge
2.Slide the L sheet under the connectors' prongs
3.Cut the light strip on the copper cutting line; (Note: To avoid electric shock and burn, please turn off the power before cutting and reattaching light strips.)
4.Peel off the back adhesive around the cutting line; (Note: For waterproof light strips, you need to peel off the silicone coating around the soldering line first.)
5.Slide the light strips under the connector's prongs, with the + polarity on both strips aligned; (Note: The + on light strip doesn't have to match the + on the connectors. The connection works as long as the + on both strips are aligned.)
6.Close the clip and set it up
Note :
The L-shaped PCB board is removable and detachable, please move it to the right place to ensure good electrical conductivity.
After you have inserted the LED strip into the connector, before you close the cap of the connector, please slightly pull and push the LED strip to adjust the connection point, until you see the LEDs light up.
If the LEDs do not light up, please use your finger to press a little hard on the 2 metal contacts in the connector, until you see the LEDs light up.
Package Included:
12 x 4 pin L shape connector
ErinThirteen
Reviewed in the United States on August 9, 2024
The connections are fairly straight forward but difficult to achieve a solid connection, causing the light to flicker and fail intermittedly.Nice quantity of connectors for the price.
Customer
Reviewed in the United States on August 18, 2024
Cheap parts but work well
Austin
Reviewed in the United States on May 22, 2024
Not the best quality must be a different connecter type
Anselmo P Santoni
Reviewed in the United States on February 7, 2024
Worked Great
Linda
Reviewed in the United States on December 23, 2024
These saved my led light. Defently worth it
jason hadley
Reviewed in the United States on December 17, 2024
Great connectors for light strips.
Troy
Reviewed in the United States on April 13, 2024
There cheap because they are cheap u pay what u get for
Customer
Reviewed in the United States on December 17, 2023
I've done several projects with the trimmable LED strips that I've cut and mounted, and then had to spend an entire afternoon carefully soldering the tiny wires & jumper connections hoping any of the dozens of solder points wouldn't fail (which they inevitable do). This is the kind of product you didn't know existed until you see it, then don't know why you were soldering the whole time...Works perfectly and is so much cleaner looking than my middle-of-the-road soldering skills.
Recommended Products
