Shopping Cart

Your cart is empty.

Your cart is empty.

2.4GHz WiFi Antenna 5 dBi, Omni Antenna Fiberglass N-Male Connector + 10FT Low Loss YMR240 Cable (RPSMA), IP67 Waterproof for Wireless Routers, Access Points, Signal Boosters

Free shipping on orders over $29.99

$27.99

$ 12 .99 $12.99

In Stock

1.:2.4ghz Antenna + Strong Magnetic Base


2.Color:4g


About this item

  • 【Antenna Specs】- Gain:5dBi | Height: 30cm/12in | Omni-directional | Freq: 2400MHz-2500MHz | VSWR <2.0 | Material: Fiberglass for lightweight durability, corrosion resistance, and IP67 waterproofing – for harsh environments.
  • 【Omnidirectional Antenna】- This 2.4 GHz omni antenna delivers up to 5 dBi gain, enhancing signal strength and potentially improving data speeds in areas with weak coverage. Its 360-degree horizontal coverage minimizes dead zones.
  • 【Application1: Single Antenna】- N-male connector antenna compatible with industrial P2P bridges and select 2.4GHz amateur radios supporting direct N female ports.
  • 【Application2: Antenna & YMR240 Cable】- Optimized for commercial Wi-Fi APs (2400-2483.5MHz), 2.4GHz drone FPV systems, and LTE CPEs (Band 41: 2496-2690MHz partial overlap) via SMA female interfaces.
  • 【Application3: Antenna & YMR240 Cable & Adapter】- Targets home Wi-Fi routers (2400-2483.5MHz), 2.4GHz security cameras, and Band 41 consumer 4G hotspots using RP-SMA female jacks.



Product Description

玻璃钢天线2.4 大首图

Specification

Antenna long: 30cm/ 12inches

Direction: Omni Directional

Frequency range: 2400 ~ 2500Mhz

Average Gain: 5dBi

VSWR ≤ 2.0

Impedance: 50 Ohms

Max power: 50W

Polarization: Line Polarization

Radiation Direction: 360 degrees

Antenna size(mm): 20*3000

Radome Body: Glass Fiber

Connector type: N-Male Plug connector

Lightning protection: DC grounding

Operating Temp: -30C~+85C

Storage Temp: -30°C~+85C

50 Ohm

High Impedance Matching

Standard 50 Ohm impedance, antenna and device impedance matching, greatly reducing the power loss of wireless devices.

Long Communication Distance

Waterproof Rating IP67

Glass fiber reinforced plastic material, anti-ultraviolet ray, not easy to crack, waterproof and windproof, strong sealing, can be widely used in outdoor and other harsh environments.

IP67

Long Communication Distance

Built-in pure copper oscillator, widely signal communication range, stable signal.

N-Male fiberglass antenna

  • The internal conductor is made of Pure Copper Oscillator, which ensures efficient and stable signal transmission and greatly improves the signal reception ability of the equipment. The Antenna well constructed and is robust enough for heavy external duty and under the premise of good preservation, it can adapt to various weather conditions.
Installation

Installation Steps

- Refer to the installation video

  1. Place the bottom of the antenna next to the pole.
  2. Insert the U-shaped clamp code through the pole and the antenna.
  3. Insert the hook and loop fastener.
  4. Put the parts through the screws in order.
  5. Tighten the nut to fix the antenna.

If you wish to be exposed to moisture for a long period of time, it is recommended to apply an anti-rust coating to metal surfaces.

Package Content

  • 2.4GHz Fiberglass Antenna *1
  • Nuts & Caps & Gaskets *4
  • Brackets *1
  • U-bolt *1
  • ( pole is NOT included )
Test Date

Professional Test Data

We have professional testing equipment to test the antenna performance data to find the best antenna placement height and angle in order to get the best signal effect.

  • Higher dBi antennas provide better coverage for communication with devices situated at a longer distance. Some examples would include within the some region, municipolity, county or in the outskirts of a megapolis.

  • Lower dBi antennas provide better coveroge for communication with devices situated at a shorter distance. Some examples would include within the some building, city neighborhood, town or willage.

hameed.tameemi
Reviewed in the United States on September 21, 2024
Nothing will change what my device was like before.
Spencer
Reviewed in the United States on July 8, 2024
I got this to try for some 2.4GHz devices I have, and wanted to see if this type of antenna was good for my usecases. It is nice to get the kit that comes with all the adapters and stuff you need, as it has a N-Male to SMA cable which is long enough I didn't need to even get a different one. The cable and the antenna both were measured using my nanoVNA which isn't the most accurate tool around, but I got a decent reading of approximately 1.5 SWR at 2.4GHz, so it's not too bad.
josh conway
Reviewed in the United States on June 17, 2024
These specs are correct. Not sure what else to say. It works well, and as intended!
Maria12345
Reviewed in the United States on December 11, 2024
But it's a well made antenna and I liked that it was magnetic.
Recommended Products

$7.24

$ 3 .99 $3.99

4.6
Select Option

$19.99

$ 8 .99 $8.99

4.6
Select Option