Your cart is empty.
Your cart is empty.
Application
It is suitable for a series of piling projects such as highway guardrails, farmland guardrails, vegetable planting, orchard stands, fence protection, and so on.
Specification
Material: ABS, Iron, Aluminium, Alloy Steel
Process: Spray Moulding
Power Source: Gasoline Powered
Gasoline Type: #92
Engine Type: Two-stroke, Air Cooling, Single-cylinder
Displacement: 52cc
Fuel Tank Capacity: 1L/0.26gal
Impact Frequency: 800-2800BPM
Fuel Type: Mixed Oil (Gasoline : 2-stroke Engine Oil = 25:1)
Fuel Consumption Rate: ≤0.5L/0.1Gal/h
Impact Energy: 25-45J
Starter System: Hand Pull Start
Noise: ≤103DBA
Max. Power: 1900W
Max. Speed: 6500r/min
Max. Torque: 3.5N.m
U-Handle Size: 37x24.5cm/14.56x9.64in
Product Length: 77cm/30.31in
Gross Weight: 26kg/57.3lbs
Net Weight: 24kg/52.9lbs
Post Driving Head Mount Size: 55mm/2.17in(Small), 70mm/2.76in(Medium) , 100mm/3.94in(Big)
Notes
1. If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again.
2. If the impact frequency is too high to hold by hand, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency.
3. If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil.
4. Please read the instructions carefully before use and pay attention to the safety matters contained therein.
5. Please keep this product out of the reach of children.