Your cart is empty.
Your cart is empty. Description
Brand New And High Quality Luggage / Inline Skate Replacement Wheels.
Deluxe Black Wheel Line
Black soft-ride durometer tire molded over a durable injection molded core rim Smooth running wheel with (2) Ball Bearing center hubs Standard Center Bearing ID is 7mm (.275”)
Size:40*18mm/45*19mm/50*18mm/55*18mm/60*18mm/64*24mm/68*24mm/70*23mm/75*23mm/80*24mm(As Picture See)
Each wheel size is sold as a SET of (2) Wheels. You're bidding on one set of (2) wheels ONLY
Please see the attached image for the approx. wheel widths for each diameter.
The Bearing ID (axle diameter) is 6 mm (.236")
MCSama
Reviewed in the United States on September 3, 2024
The title says it all. They will "fit" if you accept cambered wheels on your Pelican suitcase, but this isn't a 90s Honda Civic so please don't buy for this specific use case.
JTC
Reviewed in the United States on July 30, 2023
Installed these on my Pelican 1615 Air.They were too narrow which forced me to use washers to make up the width which is not their fault . I only mention this so others do not order for their Pelican case.On the first trip that the case was checked the wheel was severely damaged.Was it the airline fault who n owns but the wheel should have held up better than one flight.
Mailegirl
Reviewed in the United States on September 8, 2022
So much smoother on concrete now, and you can't hear me coming from 3/4 of a mile away.
oliver l.
Reviewed in the United States on August 1, 2022
I tried these to replace my Pelican 1510 case wheels. The bearings are cheap and don't spin freely. when I tried to re-attach the wheel housing to the case the new bearing shaft prevented the housing from mounting correctly to the case because they stick out past the housing. I returned the product.
E. L. Matt
Reviewed in the United States on February 15, 2022
I got these to replace the hard plastic wheels on the Pelican Air 1615 and the 1535. They are not a drop-it fit but they will work.You need to remove the original wheels and take the bearings out of them. Swap out the new wheels bearings for the Pelican ones and use the original Pelican axles and they will fit. I put two 1/4” washers on either side of the new wheels to keep them centered on the axles and prevent any possible chatter.This is a good inexpensive upgrade that makes the luggage sound much better when rolling.
Michael
Reviewed in the United States on June 14, 2018
These wheels are much softer and quieter than the stock pelican wheels they replaced. Installation was pretty easy. I used the stock pelican wheel bearings. My case got much quieter.
Marrz
Reviewed in the United States on August 8, 2017
The wheels fit nicely on the Pelican 1510 however the bearings and axle don't.Simply use the original Pelican bearings and axles.That said, The bearings that come with the wheels are pretty cheap and turn with much more resistance then a skateboard bearing. The original Pelican bearings with a dab of penetrating lubricant were much easier to spin than these bearings are new.If it were less expensive I would have ordered just the wheels
Gail Shelton
Reviewed in the United States on May 9, 2017
they work perfectly!!! I needed to replace wheels on my luggage and these are just what I needed! Vacation here i come!
Recommended Products
$25.95
$ 13 .99 $13.99