Your cart is empty.
Your cart is empty.
- Cams Run to 6,500 Rpm With Stock Hydraulic Lifters; Recommend Solids Not Be Installed
- Stock Base Circle Sizes Allow the Use of Stock Pushrods
- N4 Cams Are for Stock or Modified Applications and Have a Slightly Higher Idle Speed, but Can Be Used With Stock Hydraulic Lifters and Springs; Rpm Range of 2,500-6,500
- Designed to Fit 1991-1999 Harley Davidson XL and 1994-1999 Buell Models
- Made in the USA
- Sold in Pairs
INTAKE
- Open (In Degrees): 30
- Close (In Degrees): 46
- Duration at .053 (In Degrees): 256
- Duration at .020 (In Degrees): 296
- Valve Lift: .490
- Lift at TDC: .216
EXHAUST
- Open (In Degrees): 52
- Close (In Degrees): 24
- Duration at .053 (In Degrees): 256
- Duration at .020 (In Degrees): 296
- Valve Lift: .490
- Lift at TDC: .189
- NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances
- NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.
broken rubber
Reviewed in the United States on June 14, 2019
Andrews quality
Steve Nicodemus
Reviewed in the United States on February 27, 2017
True bolt on performance. I put these cams in my 883 sportster. Seems like it almost doubled the power! Great price and really fast shipping
Recommended Products
$515.95
$ 99 .00 $99.00