Your cart is empty.
Your cart is empty.Product Description
Perfect Addition to Your Astrophotography
Astromania T-mount to C-mount male thread adapter is specially designed for telescope prime focus astrophotography.
T2 to C-mount Adapter
T-mount (M42*0.75 pitch female) to C-mount(male 1"x32TPI) adapter this adapter used for various cameras attached to a microscope photo tube, or telescope with a T-mount (M42 x 0.75 metric thread). It can easily convert T2 mount port or T2 mount microscope trinocular phototube to C-mount type. You can then mount C-mount threaded cameras on top of this adapter.
SPECIFICATION
- Male thread: C-mount(male 1"x32TPI)
- Female thread: T / T2(M42*0.75 pitch female)
- Height: 4mm
- Brand new, never used
- Made of anodized aluminium
- Color: black
- Brand: Astromania
R. Johnson
Reviewed in the United States on February 13, 2024
Allows attaching C/CS astrophotography camera to male M42x.75 mm T/T2 threads with minimal consumption of back-focus. Nice finish, too.
Derick Sexton
Reviewed in the United States on November 3, 2024
Functionality is good
Customer
Reviewed in the United States on January 21, 2022
It fits. It screws onto the T mount on the reduction tube and then onto the C mount on the microscope camera. Just what I needed.
John Bridges
Reviewed in the United States on October 28, 2021
This product was just what I was looking for. Simple, reasonably priced, and arrived just as described.
Customer
Reviewed in the United States on April 9, 2021
This works perfectly on the back of my Orion ST-80 to thread on my guide camera. It avoids thumbscrews and keeps the entire image train a threaded, more rigid, connection. Great product and the threads are exactly as described.
SpammyQ
Reviewed in the United States on August 22, 2019
I needed this to connect a CMOS camera to a Spyratone 400mm lens to use as a guide scope. It worked great. QUality product, holds camera threads nicely.
Bobby A Sapovits
Reviewed in the United States on August 17, 2019
I've used several products from Astromania. This is like most of them, well made with clean threads and a problem solver. Adding a guide camera to on Orion thin OAG can be tough, but if you have one that has C-threads (like Astromania's , Touptek's, and other clones), this can be a life saver. Do remember that you may still need some thin spacers (either C threads or T2) to achieve final focus.
SteveDotNet
Reviewed in the United States on October 7, 2017
Well made. Threads are smooth. Does exactly what I need it to do.
Recommended Products
$32.99
$ 14 .99 $14.99
$189.00
$ 84 .99 $84.99