Your cart is empty.
Your cart is empty. Specification
Wiitek Blue Colored SFP+ Cable assemblies are high performance, cost effective I/O solution for 10Gb Ethernet and 10G Fiber Channel applications
Compatible Code: Cisco
Product P/N: SFP-H10GB-CU2M
Vendor Name: Wiitek
Connector Type: SFP+ to SFP+
Max Data Rate: 10Gbps/s
Cable Type: Passive Twinax Cable
Wire AWG: 30AWG
Cable Length: 2M
Jacket Material: PVC
Temperature: 0 to 70°C (32 to 158°F)
Compliant: SFP+ MSA, SFF-8432
Applications
Storage Area Networks(SAN), Network Attached Storage(NAS) and Storage Servers
1G/2G/4G/8G Fiber Channel
Switched fabric I/O such as ultra high bandwidth switches and routers
Date center cabling infrastructure
High density connections among network equipment
System Designer
Reviewed in the United States on February 3, 2024
What else can I Say. My switch says it failed... flashing red light after 2 hours of operation.
Customer
Reviewed in the United States on December 30, 2024
This arrived on time and undamaged.They worked perfectly.
Linux_geek
Reviewed in the United States on October 11, 2024
Thought I'd replace some 10g fiber cables with these, only to find that the compatibility with Juniper doesn't fully work (thus 4 stars). My ports come up as unknown. It knows they are plugged in, just can't read anything from the transceivers.Xcvr 0 UNKNOWN HS22081700193 UNKNOWNXcvr 2 @b UNKNOWN HS24061900110 UNKNOWNIt looks like the ports are active however so I will continue testing them to see if they can perform to the full potential.
Marc H
Reviewed in the United States on April 10, 2024
Great quality and works great. Nice colors. Wish they had these in Orange rather than red but that's it. Pull tab is better quality being flat, compared to the cheap O-ring style eject tabs on H!-Fiber's DACs.
Emma. Allen
Reviewed in the United States on May 20, 2023
Exactly as advertised!
Gabriel V
Reviewed in the United States on December 25, 2023
Flawless! Love the color! It has super fast latency and high bandwidth!
S2 Yachts
Reviewed in the United States on February 1, 2022
First of all, two of the the three email contacts on the Wiitek website failed to send due to the fact that they apparently do not exist. The only one that didn't bounce was "Tony's" address. Secondly, these are definitely not "100% Cisco Compatible" SFP cables. We attempted to use two of the red 1.5M cables to link a pair of brand new Cisco Catalyst 9500 switches to a stack of 3850's and both of the ports they were plugged into started kicking out the following identical messages in the log:Feb 1 20:58:15.179: %TRANSCEIVER-3-RPC_FAILED: Chassis 2 R0/0: iomd: Application error rc = 6: -Traceback= 1#7c8fa7b5e97a2ed2138816e715b5d591 errmsg:7FDB5CAE4000+D20 iomd_spa_infra:7FDB68F15000+5469D iomd_spa_infra:7FDB68F15000+4A6B0 iomd_spa_infra:7FDB68F15000+4B45E spa_ipc_shim:7FDB4B41F000+4D0DD if_combined_ngwc:7FDB436DD000+4BAE7 if_combined_ngwc:7FDB436DD000+4B8C8 :557C9521C000+6569B evutil:7FDB5925E000+78E5 evutil:7FDB5925E000+770F evlib:7FDB5D67E000+8D8E evlib:7FDB5D67E000+9A9C :557C9521C000+645C1 :557C9521C000+6452D :557C9521C000+64363 :Feb 1 20:58:25.612: %SFF8472-3-THRESHOLD_VIOLATION: Twe2/0/47: Rx power high alarm; Operating value: -33.0 dBm, Threshold value: -40.0 dBm.Feb 1 20:58:25.612: %SFF8472-3-THRESHOLD_VIOLATION: Twe2/0/47: Tx power high alarm; Operating value: -5.6 dBm, Threshold value: -40.0 dBm.Feb 1 20:58:25.612: %SFF8472-3-THRESHOLD_VIOLATION: Twe2/0/47: Voltage high alarm; Operating value: 3.36 V, Threshold value: 0.00 V.Feb 1 20:58:25.612: %SFF8472-3-THRESHOLD_VIOLATION: Twe2/0/47: Temperature high alarm; Operating value: 19.9 C, Threshold value: 0.0 C.Buyer beware, thoroughly validate these cables before putting them into production.
JMK
Reviewed in the United States on December 28, 2021
Short 10g cable that can be used to connect two switches. Works great and reasonably priced.
Recommended Products
$164.04
$ 81 .99 $81.99