Your cart is empty.
Your cart is empty.Product Description
Why are these kickstand enlarger pad so popular?
Side stand enlarger plate is to increase the area of the original factory side column by 2 times, so that the ground area is enough to cope with all kinds of terrain and road surface
BEFORE INSTALLATION :
- The area of the original motorcycle foot side stand is too small, so it will feel uncomfortable on the rugged road surface or the parking is unstable on the soft ground
- Even thought the stock side stand is normally effective, it can actually sink into wet or softy ground, potentially allowing the bike tip over, particularly when loaded with luggage, camping gear, or other heavy things.
This simple side stand enlarger plate goes a long way to mitigate that possibility !
AFTER INSTALLATION:
- Kickstand extender increasing the area of the side stand foot to help prevent tip overs
- Prevents the kickstand from sinking into sand, gravel, snow fields and other soft surfaces
- Avoid motorcycle side stand scuff
- Reduces scuffing on garage floors
EASY TO USE
Kickstand pad will not change the way you deploy the side stand，so it can remain on your kickstand foot and don't have to take off when driving
EASY TO INSTALL
Just loose the screws, and then put kickstand foot into the kickstand extender , finally tighten the screws
BOTTOM ANTI-SLIP DESIGN
The bottom stripe design adds slip resistance! Not afraid to slide on a rainy day!
Victor
Reviewed in the United States on February 27, 2025
Excelente
Engine Shop Joe
Reviewed in the United States on March 6, 2024
I put a number of photos with dimensions up if you are trying to retrofit this to another type of stand foot.There is one photo of it next too my dr650 kickstand. I thought because it fit a suzuki DL650 v strom it would fit my DR650 but who would of thought there would be so many types of kickstand configurations on the same manufacturer. I bought a different one that fits my bike and this one is pretty much the same quality as the name brand one I bought. So if it fits your bike it is just as robust as a pricy name brand product.
Weekend Warrior
Reviewed in the United States on March 3, 2024
Fits my 2016 dl650 side stand like a glove. It's really everything I was looking for, except if you have a center stand it does impact it and not site entirely flush against the bike. That's why I removed a star. Otherwise, works well! Be sure to use loctite on the screws.
Recommended Products