Your cart is empty.
Your cart is empty.CURT class 1 ball mounts are designed for a variety of lightweight towing applications. For basic utility trailers, canoe haulers and other light-duty trailers, a class 1 ball mount gets the job done. CURT class 1 ball mounts are designed to complement our class 1 trailer hitches and come in several different styles, offering a range of shank lengths and drop and rise options. A class 1 ball mount is typically used on compact cars, full-size cars, minivans and crossover SUVs, but it can be used on virtually any trailer hitch with a 1-1/4" x 1-1/4" receiver tube (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).This class 1 ball mount features a gross trailer weight capacity of 2,000 lbs. and a tongue weight capacity of 200 lbs. It has a length of 6-1/4", a drop of 3-1/4" and a rise of 2-5/8". CURT ball mounts, like our trailer hitches, are built to last. They are made from quality steel that is CNC-formed and robotically welded to be an exact fit for your receiver hitch. To protect our class 1 ball mounts from corrosion, UV damage and scratches, we coat each one in a powder coat of high-gloss black for a sharp finish.
Customer
Reviewed in the United States on March 22, 2025
The powder coating is so thick it won't allow the hitch to go in the receiver. If you don't mind grinding the coating off and hitting it with some paint to help with rust then it's adequate.
steven garcia
Reviewed in the United States on April 9, 2025
Great build quality, works as expected.
GatorMan
Reviewed in the United States on August 1, 2024
Works and was much less expensive than at local stores.
Cliente de
Reviewed in Mexico on June 5, 2024
El enbone queda muy pequeño, no viene en la medida estándar.
R. Egel
Reviewed in the United States on June 25, 2024
Hitch Ball Mount fits a little close to the bumper but overall seems to be fine.Would recommend you measure to assure you can clear with enough space to not damage the bumper with any attachments.
Efren F.
Reviewed in the United States on February 7, 2024
I feel like I can trust the hitch. It is very well built
Ethan Horton
Reviewed in the United States on October 30, 2024
Works goos
Kenneth Nicklowicz
Reviewed in the United States on January 28, 2024
so alot of the reviews complained about the coating on this. And to some degree they are right. I used 400 grit to get a tiny amount off and the stucker which if i might say that is the dumbest place to put it.. Anyways I like when u have to pound it in the hole (no pun) because you dont want the trailer to slap left and right because of the give. Once you start to pull and put weight on it, its going to get loose, just like my X of 17 years but this hitch is worth every penny
bs
Reviewed in Canada on August 18, 2022
A lot of surface damage exposing bare metal which will rust.
yumeel
Reviewed in Mexico on April 14, 2022
Me gusto el tipo de soldadura
Thomas J Andrews
Reviewed in the United States on July 14, 2018
I purchased this for a Drawtite hitch on a 2004 Pontiac Vibe, because it gave me the correct rise for my boat trailer, and the needed Drawtite mount would stick out the back WAY too far. But, when I went to install it, it wouldn't slide into the hitch.It seems that the powder coatings on both the hitch and the mount were so thick that they prevented the two from fitting each other. A little file work on the hitch opening helped, but not enough. I had to use a bench grinder on the mount to remove much of the coating where they slide together before they would fit. Afterward, I painted where I had done the grinding with black spray paint, and you'd never know I had to do it.It fits now (See photo) and should work fine. One star knocked off because I had to work on it to make it fit. Otherwise, I would have given it five stars.
trevor miller
Reviewed in Canada on December 6, 2015
Great deal
Recommended Products
