Your cart is empty.
Your cart is empty.Product Description
Jamy
Reviewed in Mexico on March 5, 2025
ok
TonyV66
Reviewed in Mexico on April 1, 2025
Pésimo! No sirve!Ni una estrella se mereceNo controla bien la presión, reduce mucho el flujo y no sella bien mucho trabajo para nada
George 23
Reviewed in the United States on January 4, 2024
Works as designed, at a great price, well below others like this. I installed it just before my booster pump as required and it controls the amount of pressure into the booster pump.
Luis J.
Reviewed in Mexico on May 28, 2023
Es muy funcional pero viene muy reducido el flujo de agua.
Customer
Reviewed in Canada on May 26, 2023
Leaks and nothing but trouble
DANIEL DIAZ JIMÉNEZ
Reviewed in Mexico on October 15, 2023
Adquirir esta válvula para una casa de 2 1/2 baños y es muy funcional y cumple con la calidad de suministro adecuado de agua requerido Muy satisfecho con la compra
Customer
Reviewed in the United States on October 1, 2023
Cumple con lo prometido
Jim
Reviewed in the United States on August 26, 2022
The threads do not match us standards, and will have a slow leak no matter how it is installed. Teflon tape and pipe dope both still leak.
Customer
Reviewed in the United States on June 26, 2022
This leaked when installed. Threads were not capable of sealing. Chinese junk. Had to go to supply house and by one. Used Teflon tape. Tried plumbers paste. nothing worked. Not heavy enough to be a boat anchor.
Mike
Reviewed in the United States on November 12, 2020
No instructions included but it's easy enough to figure out.. The big problem it leaked at all connection points no matter how well I sealed it up and/or how much I tighten it down. Absolutely the worse component I've ever used in plumbing. Total waste of my time and money.
Tiffany S.
Reviewed in the United States on October 8, 2020
Purchased this in March 2020 and when I first installed it, it leaked bad. After removing it and tinkering with it for a week I finally got it working but using lots of teflon tape. The inlet never leaked using 3 wraps of tape, in order to get the outlet to stop leaking I had to use 8 wraps of tape. It has been leak free for months now but will see how it holds up through its first winter. Also, this maxes out at 100 PSI on the outlet pressure.******Update******* After about a year and a half the top blew off this valve in a complete failure. Changing 4 star to 2 star.
J.T.
Reviewed in the United States on October 21, 2020
I've given this product 3 stars. The truth is that I was being cheap and this product met my needs. I'm in a situation where I was able to babysit this thing and get it to stop leaking. I gave up my time to save the $$ for a nonleaky item. I should have spent the money for the better product.Bottom Line:This thing will leak.You can tighten it only so much. You can thread tape and seal it only so much. After installing and removing and reinstalling about 5 times I finally settled on a solution for me. I used thread tape with a brush on thread seal on the threads. I then tightened the threads as much as I was physically able. I then over the course of a month applied the thread seal as needed to where the water came out.It's not leaking now. But I still have a bucket under it and I still check it once a week.Best,
Jack D
Reviewed in the United States on December 24, 2019
The pressure gauge reads the post value pressure, and not the valve pressure setting itself. That makes it perfect for a closed system like a house which has a constant pressure when all valves are closed, but not great for irrigation system as an example where the sprinkler heads all are pass through.
Recommended Products
$69.98
$ 30 .99 $30.99
$59.99
$ 31 .99 $31.99