Your cart is empty.
Your cart is empty. 3855516 Penta Duoprop DPS-A & DPS-B Tool Kit for use with D, F, FH, I, IH Series Propellers
Type D Aluminum Duoprops for DPS, DPS-A (straight splines)
Type I Aluminum Duoprops for DPS, DPS-A (straight splines)
Type IH Aluminum Duoprops for DPS-B (helical/spiral splines)
Type FH Stainless Duoprops for DPS-B (helical/spiral splines)
Type F Stainless for DPS, DPS-A (straight splines)
To help you remove and remount Duo Props. This special tool helps you remove the forward and rear propeller nuts.
balbino alegre friaza
Reviewed in the United States on June 7, 2024
la verdad un buen servicio 1000 veces mejor que ebay
Garry Pope GPLighting & Design, Inc.
Reviewed in the United States on June 11, 2024
The prop nut tool didn’t fit, it was a smaller size, 29 mm. Had to buy a 30 mm metric socket to remove it. Large prop sleeve tool worked perfectly.
Charles D. Youngquist
Reviewed in the United States on June 1, 2024
Before you go to work, find a 1-3/16” socket with a breaker bar or a combination wrench of that size to remove the outer nut. Also, you’ll need a pipe wrench or strong rod that’ll fit the stall hole in this tool for removing the inner nut. The wrench that comes in this made in China set (ie. very cheap) does not fit the outer nut. I tried hammering it on and it could be seated only about 3/8” onto the nut. At this point I tried to remove the nut. After bending the arm of this tool about 30 degrees with no nut movement, I opted to buy my 1-13/16” socket. The tool for the inner nut fit well, but the rod just bent again so I grabbed it with a pipe wrench and it came off easily. This boat was new four years ago, has only 65 hours on it and has been kept out of the water on a lift when not in use. It had no corrosion or deposits to inhibit figment or removal. Buy it for the inner nut wrench, but the other piece is useless.
jason
Reviewed in the United States on May 12, 2024
Everything is as it should be
Craig H.
Reviewed in the United States on May 10, 2024
This unit of rods very quickly and is for the most part as described. The qualm that I have with it is that it is not the strongest material, my boat is kept in the water and a slip all season long here in New York and at the end of the season when you go to remove the prop that peace needs to be reinforced so that it does not bend and twist.
Customer
Reviewed in Canada on October 12, 2024
Smaller nut wrench for the rear prop does not fit new style DP so that's no good. Good for removing the forward props though. Metal bends easy so be careful.
Fashionista
Reviewed in the United States on April 11, 2024
Worked like a charm on my old boat. Exactly what i needed to change my zinc ony 1985 Bayliner Contessa pinta volvo out drive
Roby58
Reviewed in Italy on September 7, 2023
Allright
L. Gerhard
Reviewed in Germany on June 3, 2023
Rasche Lieferung, angekündigter Termin wurde eingehalten.
Bruce
Reviewed in the United States on June 29, 2023
I thought I was getting a great deal as always things are too good to be true at certain price points. It took a while to get the hex head onto the board as the casting was poorly done. When I went to go turn the bolt the handle snapped almost instantly. Leaving me with a very challenging situation. I ended up running out and buy a plumbers wrench to get some grip on this piece to spin the bolt off. And then took an extensive period of time to get the hex head off the bolt due to the poor fit. Highly disappointed truly a cheap and poorly made product.
Petruzzi Gianpietro
Reviewed in Italy on May 29, 2023
Rapporto qualità prezzo
Linda Dambrosio
Reviewed in the United States on October 8, 2023
good price highly satisified description as expected
Richard B.
Reviewed in Canada on June 8, 2022
Used item to remove a duel Volvo prop. Worked as advertised.
Recommended Products
