Your cart is empty.
Your cart is empty.
Features:
- Condition:100% Brand NewLight
- Color: Red/Blue/Green
- 1-6 Level IP68 Waterproof Gear display
Fitment:
- For Kawasaki Vulcan S 650 2015-2018
- For Kawasaki Vulcan 900 2006-2018
- For Kawasaki Vulcan 2000 2008-2011
Notice:
- The wire pins is not plug to the ecu socket adapter when you received, this will be more convinient for you to wring and fix the wire.After pins plug into the ecu socket adapter and then plug in your bike's ecu port, then it will be ok.
Instruction:
- After you receive the gear indicator, pls connect the cable at right port according our poduct page and plug into your motorcycle's ecu plug, then open your motorcycle's power(not ignition) and then it will younts from 6-1 and then "L" blinks, L means learning, when "L" blinks, no more wait, ignition your motorcycle, and then run at different speed to set the gear indicator;Show right gear level, after seting finished, then it will work with your bike, if it doesn't work properly, you only need to reset (6 times power open and cut off)
Package Include:
- 1 x Gear Indicator (Contains installation instructions)
David p.
Reviewed in the United States on May 24, 2023
Works well on the 2008 Kawasaki Vulcan 900. Until the center display diode failed after a month of use. The rest of the display still works, but when in gear 2,3,4,and 5 (the Vulcan doesn’t have a sixth gear, the display for 6) is missing the center slashes. Also if there is an error, it’s supposed to display an F. But since the display is borked in the center it looks like an upside down mirrored “L”
Alex
Reviewed in the United States on February 11, 2022
Like most reviewers have already pointed out, it has a significant lag which is very annoying. For a new rider, this can cause allot of confusion and potentially be dangerous.
SAY
Reviewed in the United States on March 25, 2021
Perfect plug and play with minimal assembly.
Helio Ribeiro
Reviewed in the United States on December 20, 2021
The purchase was good, but the product has two problems: 1. There is one delay 1 second to show the correct gear; 2. The gears doesn’t ready when we turn on the motorcycle, just after we ride some minutes.
RB
Reviewed in Canada on November 5, 2021
The instructions were straightforward and easy to follow. I am satisfied with the operation and it works as described. Due to the fact that this motorcycle doesn't have a gear indicator it only displays the gear change once the clutch is released. I purchased the holder but, didn't end up using. I decided better placement was below the tachometer that I had purchased and installed from Kawasaki Canada.
Jason Roberts
Reviewed in the United States on July 12, 2020
Works great. I like knowing what gear I’m in. Not sure why the heck it’s not standard on my bike. Easy install and has worked great since I got it.
David Nguyen
Reviewed in the United States on May 31, 2020
Fairly easy to install. Instruction didn't really point out where to plug it in on the bike, but after research I found it.2016 Kawasaki Vulcan S Abs plug is right by there battery.Works great, shows your what hear you're currently in after it's been engaged. I bought it to truly know if I'm in 6th great or not. It is a bit hard to see the indicator in direct sunlight, at least where I've position it on the bike.
Jon Gretarsson
Reviewed in the United States on January 1, 2020
I got it fast and fine
Mike Beck
Reviewed in the United States on April 17, 2020
Please read the entire commentsThe shipment came fast and the install was pretty easy, plug and play. It took a couple of weeks for the calibration to settle to a consistent reporting. After a couple of months of it working fine, it records 1st through 3rd gear fine, the flashes past 4th gear indicator directly to 5 when shifting into 4th gear. Down shifting from 5th to 4th the indicator continues to display 5. It then goes directly from 5 to 3 when downshifting from 4th to 3rd gear. Disappointing that it only worked for a couple of months. I tried disconnecting and reconnecting but makes no difference.I am updating my previous remarks. This issue I experienced was do to the installation of a Speedo corrector I added. After locating the install and setup instructions for the Gear Indicator, it provided instructions for how to reset the gear indicator and let it relearn the gears. I left the original post in place in case someone was experiencing the same thing I did. Resetting is easy, turn the key off and on 6 times while the indicator is counting up to 3 or 4. This will reset the indicator and put it back in learning mode. The issue was not the gear indicator's fault, I caused the issue. This is a good product, I would order again
Recommended Products
