Your cart is empty.
Your cart is empty. What you get?
1pcs metal printing build surface-320 X 310mm, Please note: not include the magntic sticker, you can use your original or you need to prepare for yourself.
Every plate's material has its limited and advanturage, before ordering, please knowledge the plate's character.
Feature:
Easy to install: cover on your magntic pad or magntic hotbed, Once you get used to aligning the metal plate it's just as easy as glass. Also, This metal plate is friendly for a heated plate of aluminum that the added thickness retains more heat and it allows the bed to cycle less,
Easy to remove the prints: Prints come off the PEI plate with no need to pull or pry the print if you let the bed drop below 32 C. When you have not wanted to wait for the bed to cool, you can left the PEI plate off of the printer and flex it. The prints just snap off.
How to clean: First, wash thoroughly with dish soap and water, then when dry, rub it down with rubbing alcoohll (you only need to use soap and water the first time, or when switching between materials like PETG and PLA).
Vincent M.
Reviewed in the United States on July 2, 2024
The carbon side won't stick. The other side sticks ok. The notches in the back are too close together so you have to modify it. I guess you get what you pay for.
Scott Richards
Reviewed in the United States on June 30, 2024
No issues what so ever and actually the surface from this plate is is as good or better than glass without the glue stick to A+ product
SaulGoodMannnn
Reviewed in the United States on June 3, 2024
I was really hoping Fysetc had corrected the issues I read about in the reviews by other purchasers or I thought maybe it was just the K1 that it didn’t fit on…I’m using this same bed on my ender 3 pro and I absolutely love it…never once had a problem with adhesion and it looks amazing and the CF pattern on the prints looks fantastic. The bed on the S1 is 310 x 315 (x/y) and it could add a small amount of additional print space if you tweak your settings…I have read some people just cut the sheet or take a dremel to it but im reluctant and will just exchange it for another from a different brand. It doesn’t come with a magnetic sticker if that matters to you.
Mike G.
Reviewed in the United States on February 25, 2024
Well, the cut isn't quite right for the k1 Max. The size is good, but the little cutouts for the alignment lugs in the back of the hotbed are not quite large enough for the plate to sit all the way back. This buildplate is also thinner than normal so it is much more flexible and also feels very cheap. As for how well it works. I have only used the "carbon" side a few times and so far it works alright. Can't speak for longevity, but time will tell.
Tim O'Dell
Reviewed in the United States on April 9, 2024
Purchased this for my K1 Max, humorously remembering after it arrived that I had already purchased one a short time earlier... what can I say, I have a lot going on. No problem though, I use it on my CR-10S Pro v.2 with Sonic Pad and it works great. Very pleased as always with this FYSETC product.
A.
Reviewed in the United States on April 4, 2024
Yes, the tabs are off and I had to cut out a set of new ones with my Dremel tool but once that's done, the plate is great. The textured side is OK, but the smooth side is the best adheresion(guess I just created a new word) I ever got with PLA making the bottom layer smooth with a nice carbon pattern. One more thing to note is that you need to adjust your Z-offset since each texture side is different thickness creating a different distance from magnetic core .
The ultra buffalo
Reviewed in the United States on April 1, 2024
Just like the other reviewer said, the lineup just isn’t quite right. This isn’t a deal breaker, we’ve aligned plates for years without the nifty tabs but the overall quality is lacking. It’s an overall flimsy plate.Sometimes “gadget” the ai bot print watcher of Obico likes to spot the purge line as a pending failure and pause the print. To prevent this I usually flick the purge turd off the bed but sometimes have to use a scraper as the print head is conveniently in the way. During one of these purge blob fling maneuvers I scratched through the pei…with a plastic scraper. I guess a very sharp one but also the pei layer is surprisingly thin. The carbon sticker is just a peo sticker and it’s adhesion is ok at best. It was improperly aligned on the plate by whoever stuck it down but not terribly off center so no biggie there. But A perfectly clean plate fresh off the wash rack has probably 50% chance of sticking. Once it sticks you’re good but if it sticks is the issue. With pla no less. Petg sticks easier however and the other filaments are not recommended. Also, fail by me by not reading the details, but there’s no magnetic sticker. So you pay twice the average for a double sided plate with no mag sticker. I contacted the seller twice to express the issues and received no reply so I would steer clear of this one.
Recommended Products
