Your cart is empty.
Your cart is empty. Near-universal replacement spout kit fits most plastic fuel & water cans including Scepter, Gott, Briggs, Blitz, Rubbermaid, Midwest, Eagle, Igloo etc pre 2009
Not for use on Chilton, Craftsman, Anchor, No-Spill, F-Style jugs, Racing jugs unless used with special adapter (available online). Fits SOME metal cans-those that use a standard-size base cap like some Scepter & Briggs models. Others may require an adapter.
Also comes with filter screen to keep debris out of your vehicle/equipment & act as a flame arrestor.
Yellow Vent Caps for faster and safer emptying, drill required.Start with an empty can, Drill a hole at the back of your plastic can above the fill line, insert vent cap and pop it in gently with a rubber mallet.
Ace
Reviewed in the United States on March 2, 2025
Will not seal to the old cans JUNK !!!
Michael A Saville
Reviewed in the United States on January 22, 2025
Came with instructions, Product seems durable and of high quality. I did notice there was no O-ring Gaskets in gas can spouts where it screws onto gas can. Hope it doesn't leak?
Bill S.
Reviewed in the United States on September 14, 2024
Works great for me
Lance Forakis
Reviewed in the United States on August 11, 2024
So I noticed someone else said The same thing but I figured it was a fluke. It is not!!! I seriously had gasoline in the cans for two days and went to use the new nozzles and the when I unscrewed the nozzle the gasket was completely swollen and mushy. I went ahead and turned the nozzle around from the stored position to the poor position and tried using them anyhow and no surprise but the gas just leaked out and went all over the ground. When I took the nozzle back off at this point the gasket was just tore up because it was so mushy from the gasoline. If you see this review believe me when I say don’t but these! They are complete junk. I will upload an image so you can see what I am talking about.
~Wen~
Reviewed in the United States on July 21, 2024
I got these because the safety type for one brand is impossible to use, another brand had the caps missing and another brand had no spout. These fit all 3 brands that are 3 different sizes very well with no leaking that I can tell.
Robyn R. Jones
Reviewed in the United States on July 20, 2024
These replacement nozzles worked out great, best part is having the vent on my gas cans again.
S. harris
Reviewed in the United States on July 17, 2024
Good for fixing older gas cans or fixing new ones. We all know just how bad the new 'safety' spouts are. I've never had so much fuel leak everywhere when pouring into a tank than with these new 'safety' cans.
RussHerman
Reviewed in the United States on December 4, 2024
Well designed product but the rubber seal inside the cap that attaches to the gas can is extremely flimsy. The seal tends to disfigure and almost tear which results in the gasoline leaking where the nozzle is attached to the gas can. I've not been able to find a rubber seal or o-ring that fits and will block the holes in cap that goes inside the nozzle for storageThe small seal that is inside the cap to the nozzle does not stay in place and is easy to lose. Replacing this seal with an o-ring on the male threads of the nozzle solves this problem.Updated 12.27.24 - the original seals have total deteriorated and I have not been able to find a replacement seal that does not leak. It appears I am past the return date. I should have returned these back then. Junk!
Recommended Products
