Your cart is empty.
Your cart is empty.Product Description
Philippe Rodrigues
Reviewed in France on September 6, 2024
Parfait fait son job
N. S.
Reviewed in Germany on July 7, 2024
Hat perfekt funktioniert, Gewinde ist auch gut
P
Reviewed in Italy on May 7, 2021
ok
Customer
Reviewed in Canada on March 1, 2021
did the job, used on 2001 polaris sportsman 90, make sure threads on flywheel and tool are clean, be careful threading in not to cross thread, a little oil on all threads and tighten, pulled it right off. Not a fine tool by any means but great for the do it yourself mechanics and a fraction of the cost of a precision made tool.
Luís Miguel Martín García
Reviewed in Spain on February 13, 2021
Perfecto.
John Rodriguez Jr
Reviewed in the United States on June 30, 2020
Worked great on my Zuma 50. Definitely worth buying the GooFit tool over the generic one. It’s a quality steel that looks like it should last for as long as I care to tinker! Oh and if your motor hasn’t been taken apart before it might sound like a loud crack when the tool seats and releases the flywheel. Freaked me out at first and then I checked the housing and everything looked like it was fine. We’ll see when I go to put it back together!
A. E.
Reviewed in the United States on February 8, 2020
I bought a cheaper version of this puller, and it stripped, wasting a day for me having to wait for this one to arrive. This GOOFIT puller worked like a charm, didn't show a hint of stripping, and popped my gy6 50cc scooter flywheel right off. I highly recommend this puller.
mrcamaro84
Reviewed in the United States on July 26, 2019
Works great , I used on a vento 49cc 2 stroke and a tao tao 49cc and a 150cc engine. Great quality tool. I'm very happy with this tool.
Chris
Reviewed in the United States on June 6, 2019
This little flywheel puller came with a key chain that says "Good Fit". I'm not sure if that's supposed to be the brand name, because they cant even spell it right in the product description! Well, this tool certainly didn't have a "good fit". The 27mm threads were cut incorrectly (not nearly deep enough) making it impossible to install more than one thread deep. Besides the threads, the machining on the rest of the part was garbage, along with the quality of the black oxide coating. I suppose you could use it as a paperweight, if you didn't mind looking at something so ugly all day. I returned it and bought a slightly more expensive puller from a trusted brand. Don't waste your money on this JUNK.
Debbie S.
Reviewed in the United States on February 4, 2019
I’ve built over 50 pit bikes, and this tool was long overdue. After getting sick of mushrooming crankshaft threads using the old screwdriver-and-hammer truck, I finally folded and got me one of these. Works great, and doesn’t damage anything!!
Flinters
Reviewed in the United States on October 29, 2018
At less than $10, why bother risking damaging your flywheel? Once it was delivered, it was less than a minute later that I had it unpacked and threaded into the flywheel (left hand threads remember). A quick hit with the impact fun and it came off without any hesitation. Such a simple design and it works for what it needs to.Boom.Done.Do it.
Menthol
Reviewed in the United States on July 1, 2016
Worked great! Now what do I do with it? I mean I don't need to use it again for a while. But it sure made my life easier!
FraterMus
Reviewed in the United States on April 20, 2016
This tool made flywheel removal on my 157QMJ 150cc gy6 engine very easy, granting access to the stator underneath.Notes for first timers: 1) the driving bolt can be put in either end of the puller so you can use it on two different sized flywheels. Maybe 50cc and 150cc? I don't know.2) the puller is threaded counterclockwise into the flywheel and the driving bolt is threaded normally.
Recommended Products