Your cart is empty.
Your cart is empty.Product Description
Andrej
Reviewed in the United States on February 10, 2025
Collor is more like copper gold than yellow gold. Otherwise looks great!
Metro gnome
Reviewed in Canada on April 18, 2025
But this for string-thru tele, not the 6 single individual ferrules- here's why...If you're good at math, and/or carpentry, you can use this plate and only this plate, as a guide, to drill 6 perfect holes through both Sides of your telecaster without a drill press....Telecasters aren't that thick so if you nail the math, and your marked spots. This is basically a really useful pre stencil, because it is symmetrical ....(All you really need is this and a ruler. Best part is, you're really just making the top holes cosmetically perfect, the bottoms you can mulligan, re plug, redrill and cover with this plate...string ferrule holes aren't done with a high gauge drill, trust me you have infinite chances to get it right )Youre welcome
Private Name
Reviewed in the United States on September 19, 2024
its fine
Mr. Cello
Reviewed in Canada on August 29, 2024
Seems solid (will update when I install) but not much clarity in description about what the spacing is. I purchased this bridge (https://www.amazon.ca/dp/B01LCW4ZMI) to go with it and the spacing lines up exactly; per the drawing on that page the hole spacing is 13/32" or 10.5mm.
John Gonzales
Reviewed in the United States on May 31, 2024
This string guide plate worked well for my Telecaster project. I didn’t do a very precise job of drilling string holes through the guitar body but this unit nicely covered up my sloppy drilling.
Mark
Reviewed in the United States on March 19, 2024
I installed this on a fresh nomoonlaser tele style body, everything lined up great. I had use a drill bit to make the holes in the body slightly larger, and then tapped it in with a small rubber mallet.
Dakota Storm
Reviewed in the United States on November 25, 2024
Custom built cherry wood Nashville telecaster with purple heart neck
Bill Karoly
Reviewed in the United States on January 2, 2024
For what I needed it is ok. Prior to chrome being applied the mfg did not clean it up and it resulted in sharp edges and a rough surface.
amazonian
Reviewed in Canada on April 17, 2024
8mm not 6.5mm holes
Steve Brand
Reviewed in Canada on September 27, 2023
Used this to convert a custom Explorer style guitar to string-through instead of top-loading. Achieved a nice, clean result with simple installation.
stomp944
Reviewed in the United States on August 28, 2023
Have purchased same before. Works well and looks good. Mounts a few mm above guitar body.This one did arrive with a very slight blemish along one edge, but where it is positioned on the back of the guitar, its not that big a problem.
ron
Reviewed in Canada on June 7, 2023
Good quality but spacing does not fit squire thin line telecaster. I had to ream the holes closer together to get it to fit. Looked awsome once fitted!
Larry C.
Reviewed in the United States on June 3, 2023
Good quality and easy install
Recommended Products