Your cart is empty.
Your cart is empty.
This LF-RF800 Lens Foot Base from Haoge is an replacement foot Tripod stand for Canon RF800mm F11 IS STM Lens. It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.
Lens foot is designed backwards. so the weight can be better distributed,Features:
Brand: Haoge
With AS standard interface, compatible with all Acra-Swiss Style quick release platforms.
CNC machined.
Hard anodized for better protection from outside environment.
Two safety stop screws in both side to prevent drop by accident.
Reserved 1/4" and 3/8" screw holes at the bottom.
Built-in Strap hole.
Length: 88mm
Height: 33.3mm
Compatible with:
Canon RF800mm F11 IS STM Lens
Canon RF 600mm F11 is STM and Canon RF 800mm F11 is STMNOTE: it can't be used for Other Lens,Does not Compatible with battery grip
Package Included:
1 x Haoge LF-RF800 Lens Foot
jkh
Reviewed in the United States on January 10, 2025
The screw attaching it to the lens continued to loosen up making it unsafe to use with my lens and camera.
Mickey
Reviewed in the United States on August 19, 2023
I did not read the "Note" at the bottom of the item description and ordered without knowing it will not work if your camera has a battery grip. That's on me. That said, the small pin that fits in the hole in the camera lens foot mount does nothing to hold the two pieces together other than preventing the camera and lens from rotating separate from one another. I ground the pin off and it allows the foot to mount without hitting the camera battery grip. The four small rubber pads on the foot provide a great deal of grip and secures the two pieces to each other. I found the fit to be very tight. If you wanted you could also add a tiny drop of adhesive to each rubber pad for additional grip. One thing that should be included is a mounting screw that is a tiny bit longer.
照井光久
Reviewed in Japan on January 20, 2023
６００㎜望遠に使用していますが本体に突き当たるため１０㎜ほど切り落としました
sinsin
Reviewed in Japan on March 14, 2022
固定用のビスがとても緩み易いです。スプリングワッシャーやスペーサーなどが必要かもしれません。うっかりしていると三脚から落下の危険もあります。
Newton
Reviewed in the United States on January 23, 2022
It fits the RF 600 STM lens well.
Hurricane
Reviewed in the United States on September 24, 2021
I will say the price was good and shipping was fairly fast. The plate itself was somewhat well made. But, it was made incorrectly. In the product picture it shows the alignment pin at forward part of the foot as it should be. Well, the one I was sent wasn't. The pin was on the back side of the foot. If I attached the foot to my lens the long part of the plate would have been under my camera. Since I use a battery grip, there is no way to attach the foot. They need to check there QC standards.
Rich
Reviewed in the United States on September 21, 2021
Adds the ability to mount lens on gimblal.
John
Reviewed in the United States on July 23, 2021
Metal construction, well made and finished.
Elliot Lowe
Reviewed in the United States on July 20, 2021
This foot also doubles as a handle when walking
Docker
Reviewed in the United States on November 20, 2021
I bought this specifically because it mounted in the illustrations with the open end of the foot facing the camera. With this lens in the extended position that would give the best point of balance on a tripod head. The product shipped to me had the pin on the mounting surface in the opposite position to what was illustrated and so the open end of the foot faces AWAY from the camera hence shifting the point of balance much further forward so balance on a tripod is impossible. I have kept it as the foot position does protect against accidental manual focus ring movement. It is well enough made but not as illustrated.
Recommended Products
