Your cart is empty.
Your cart is empty.Product Description
High Quality & Best Service
Hromee has professional engineering team that design and collocate with various of automotive tools including tire repair kit, plugs, air hose etc. we also own a factory over 10 years. All products are produced and sent from factory to warehouse directly so we provide the best service and highest quality to you.
20 Pieces Air Blow Gun and Brass Fittings Kit
This 20 pieces air tool accessory kit is the perfect starter for a new compressor. Here's everything you need to connect air tools, inflate tires or sports equipment and to clean with compressed air. This kit includes clean-up tool, connectors, inflating tools and hose repair kit for all kinds of works like cleaning your garage floor, workbench and other areas, inflating car tires, truck tires, pool toys, sports balls and air mattresses, repairing most common hose failures.
- Material: Brass
- Fittings Material: Solid Brass
- Max Working Pressure: 90 PSI
- Tire Gauge Measure Range: 10-50 PSI
- Tire Gauge Measure Range: 40-350 kilopascal
- Connectors: 1/4 inch Industrial Quick Couplers and Plugs
CLEAN-UP TOOLS
The clean-up kit includes a blow gun, a tapered tip and a rubber tip. The blow gun, made of zinc alloy, delivers powerful air flow especially for clearing up messy spots or drying jobs. The rubber tip can protect the delicate surfaces from damage.
HOSE REPAIR KIT
One brass hose barb with 1/4 in. and 1/4” MNPT fitting to replace damaged hose ends. One brass double barb for splicing hoses to fix damage in the middle of the hose. Stainless-steel high tension hose clamps are easy to use and provide a tight and secure hold for 1/4 inch to 5/8 inch (0-16 mm) hoses.
CONNECTORS&ADAPTORS
There are various 1/4” NPT industrial connectors you need for air compressor in this kit: 2PCS Male Quick Connect Plugs, 2PCS Female Quick Connect Plugs, 1PC Male Coupler, 1PC Female Coupler. Brass Couplers and plugs are better rust-against than steel, stronger than aluminum.
Air Tool Accessory Kit
1 x Blow Gun, 1 x Hose End, 1 x Hose Splicer
3 x Hose Clamps, 1 x Tapered Nozzle
1 x Dual Tire Chuck, 2 x Inflation Needles
1 x 50 PSI Tire Gauge, 1 x Female Tire Chuck
1 x Plastic Storage Box, 1 x Rubber Blow Gun Tip
1 x OSHA Safety Blow Gun Tip
2 x 1/4” Industrial Plugs Male Threads
1 x 1/4” Industrial Coupler Male Threads
2 x 1/4” Industrial Plugs Female Threads
1 x 1/4” Industrial Coupler Female Threads
rebecca
Reviewed in the United States on March 11, 2025
Works great!
Sean
Reviewed in Canada on May 3, 2024
Perfect, What I needed thanks
Customer
Reviewed in Canada on February 12, 2024
Works as it should
megan moore
Reviewed in the United States on November 14, 2024
Just as I had ordered. It was just what I needed.
OffGrid9
Reviewed in the United States on December 21, 2023
Nice brass fittings, threads are clean and work smoothly. Some fittings are pre-coated with a stiff red rubber-like compound, makes it harder to install them than teflon tape, but once installed, (either the pre-coated ones or the others, with teflon tape) I had no discernable leaks. I think the quality of the fittings, and of the attachments, is quite good.As some have said, the plastic box is nice, but after you install the fittings, most items no longer fit. That's OK with me, I put all the gadgets and leftover fittings into another small box without dividers, and used the plastic box to sort out a bunch of loose nuts, bolts, & whatnot. I like it.Only one real DISLIKE - the pencil pressure gage (like most such gauges) is WICKED inaccuate. On my high-end AutoMeter gauge, all four tires on one vehicle were perfect at 36 PSI - the pencil gauge in this kit read right on 25 PSI. Worthiless, you'd think? Except that it was, at least, consistent. I'll keep it in that vehicle, knowing that I need to inflate to 25 PSi (on THAT gauge). Better than nothing, when my good gauge is in another car.
Customer
Reviewed in the United States on November 7, 2023
If you have a air compressor this is a "must have" add on. I have used several of these attachments in the past few months and am very happy with how they performed.
francois bergeron
Reviewed in Canada on October 8, 2023
garage
Kathleen V Nowicki
Reviewed in the United States on January 4, 2023
Used this kit to put fittings on a 25ft hose, and also assembled fittings to the tire inflation wand, and hand trigger. I used two wraps of teflon tape (I already had in my tool box) on each connection. All connections tightened the first time with no leaks up to 150 psi. The tire pressure gauge included reads 10 to 15 lbs low, so that was a disappointment, but otherwise the kit seems good. For the price it is a good value. As expected, brass fittings go together with no leaks. All fittings and threads appear to be good quality. The hand trigger attachment is solid and functions properly. Looking forward to getting many years of use out of these tools.
Gary Tapp
Reviewed in Canada on September 12, 2021
It’s good for the value , everything needs to be nice and fully tight to not leak air. Good value for the price
Joe Walsh
Reviewed in the United States on September 2, 2020
I bought a 150 PSI compressor for my RV. While filling up one of the tires the hose blew off. This kit had the hose clamps to fix it. There are also a lot of other goodies that are useful for filling up different inflatables. Comes with a solid case, and parts are of good quality. I recommend for go to back up Parts for your air compressor.
Sean
Reviewed in the United States on July 4, 2020
They seem ok not bad for the price although mine came with a busted case. The pieces seem ok. Not high quality not good quality but ok. Not cheap either. We'll see how they hold up. I would give it 4 stars if it didn't come damaged. 😉
SamF
Reviewed in Canada on November 10, 2019
So far I've used this twice and it's amazing. If inflated tires and blew dust off my PC. Amazing value.
Ben Dover
Reviewed in the United States on October 29, 2019
The media could not be loaded.
Recommended Products