Your cart is empty.
Your cart is empty.King win PCI-E Frame for 2.5” HDD that converts 1 PCI-E slot into 2 x 2.5” IDE/SATA HDD/SSD Mounting Bracket. KW-PCI2H25 supports any 2.5” IDE/SATA HDD/SSD. Make full use of your open PCI slot!
Ryan
Reviewed in the United States on May 26, 2025
Not a single set of holes lined up with hard drive. Looked over other reviews and images from webpage to verify I was attempting to install this correctly which confirmed that the holes are misaligned.
Lonnie Jones
Reviewed in the United States on May 20, 2025
I must have bought 15 of these mounts. Some I use as-is, others I use a miter box to saw off 1" to fit smaller enclosures.the plastic allows drilling screw holes anywhere needed.
Robert
Reviewed in the United States on January 11, 2025
Almost 5 stars. holds hard drives in place but some of the screw holes threads were not right, i had to use the common screws that are for holding in power supply and pci slots as hard drive bracket size screws would just slide right in. the defect appeared on two of the three brackets sets i bought, i think this is due to it being thin metal compared to the heavy metal brackets of twenty years ago so the tool making the threading just striped the holes. other then that they were great.
JF
Reviewed in the United States on April 7, 2025
I needed a hard drive caddy for an older V3 Thermaltake desktop and this worked.
Geir Elstad
Reviewed in the United States on April 7, 2025
Fast and trustworthy
Bruce
Reviewed in the United States on April 29, 2025
It came with 8 screws - 4 to put the drive into it, and 4 to mount it inside the computer. It holds my 3.5 inch harddrive firmly in place within the 5.25 inch bay so its protected from shocks (bumps). The screw holes are adjustable for different lengths to suit your case. It does what I expected it to do.
Greg Miller
Reviewed in the United States on September 26, 2024
This worked great for putting a SSD into an old Boss BR1600 recorder. Hard drive quit so bought this awesome mount. Put a 2.5 in SSD into this mount and then into the recorder. Restored for future generations to appreciate.
François Missiaen
Reviewed in the United Arab Emirates on January 7, 2024
The product is good, fit the tower well and practical. However the screw holes holding the drive in place are a bit weak and can break upon tightening. Still keeping drive in place, but not neat.
Adnan
Reviewed in Saudi Arabia on September 25, 2022
works fine with me
simon
Reviewed in the United Kingdom on June 26, 2019
Nice !! Has anti vibration pads too :-)
Cliente de
Reviewed in Mexico on June 26, 2019
Muy buen material y media exactas, funcional y fácil de instalar.
Antonio F.
Reviewed in the United States on January 13, 2017
This Kingwin Tech internal 3 x 2.5" HDD to 5.25" metal adapter is a very nifty bracket. It worked perfectly for me. There are some things you should know; read on!I needed to install a couple of SSDs (every one of my 6 SATA connectors is used) and this was a beauty.1. The SSD that went on the bottom ONLY uses bottom screws for attaching.2. I skipped the middle, which provided some room to plug/remove the cables, and installed the other SSD on the top.3. Both middle and top slots use side screws for attachment, unless the bracket is flipped, which would make the top the bottom and vice-versa.4. One more thing that is WORTH mentioning is that this is NOT as tall as a regular 5.25" unit (CD/DVD). It is shorter. For my situation it was a blessing, since one of the SATA power cables makes a loop (plug is in the middle of cable) and needs space above and below.5. It has two (2) sets of bolting patterns (onto the computer case). Use the top ones and it will be flush with the bottom of the 5.25" space available. Use the bottom ones, and it will be flush with the top. COOL!6. These metal brackets are made of fairly thick gauge galvanized sheet-metal (probably 18ga), which provides plenty of metal for the screws to grab onto without ever stripping the female threads. This is GREAT!7. A little Warning: DO NOT slide your fingers alongside the edge of the metal, since these were not filed/sanded into a ultra-safe/smooth roundness; it MAY cut through the skin. The shearing press used was very good, and NORMAL handling is totally safe. Rounding the edges would have increased the cost of these units substantially.8. Great Value.
Kyle
Reviewed in Canada on March 4, 2016
Not the prettiest thing in the world, but it does the job. I wanted to put my 2 SSDs in one 3.5 bay. I have the Fractal Define R5 case which comes with 8 3.5 bays, and 2 SSD brackets behind the mobo; however, Ive taken the upper 5 3.5 bay enclosure out for airflow I'm currently only using 2 of the 3 remaining bays, 1 has a 1TB HDD and I wanted to put my two SSDs in one 3.5 bay because I might through another HDD in my remaining 3.5 bay.Will fit nicely in a Fractal R series bay. I kind of like that its a simple bracket design; however, I may paint the brackets to match the rest of the tray. I think my SSDs look pretty cool stacked together.
Recommended Products
$19.58
$ 7 .99 $7.99