Your cart is empty.
Your cart is empty.Product Description
Applicable: Compatible with Ford petrol EcoBoost GDI engine ranges from 1.0lit to 2.0lit engines. Replacement for Ford injectors No CM5G-9F593-FA. Applicable Vehicle Include: Compatible with Ford B-MAX; Compatible with C-MAX/Grand C-MAX; Compatible with Ecosport; Compatible with Fiesta/Fiesta Active; Compatible with Focus/Focus Active; Compatible with Galaxy; Kuga; S-MAX; Compatible with Tourneo Connect; Compatible with Transit Connect; Compatible with Transit Courier.
Engine Code:
----1.0 EcoBoost M1CA; M1CB; M1DA; M1DD; M1DH; M1JA; M1JC; M1JE; M1JH; M1JJ; M1JM; M2DA; M2DB; M2DC; M2GA; M2GB;P4JA; P4JB; P4JC; P4JD; Q0JC; Q0JD;SFCA; SFCB; SFCC; SFCD; SFCE; SFCF; SFDA; SFDB; SFJA; SFJB; SFJC; SFJD; SFJE; SFJF; SFJH;SFJJ; SFJK; SFJN; SFJP; XMJA; XMJB; XMJC; XMJD; YYJA; YYJB; YYJC; YYJE;
----1,5 EcoBoost BNMA; M8DA; M8DB; M8MA; M9DA; M9DB; M9MA; UNCA; UNCB; UNCE; UNCF; UNCI; UNCJ; UNCK; UNCN;
----1,6 EcoBoost JQDA; JQDB; JQGA; JQMA; JQMB; JTBA; JTBB; JTDA; JTDB; JTJA; JTJB; JTJC; JTMA; JTWA; JTWB; YUDA;
----2,0 EcoBoost R9CB; R9CD; R9CF; R9CH; R9CI; R9DA; R9DB; R9DC; R9DD; R9MC; TNBA; TNCA; TNCB; TNCC; TNCD; TNCF; TNWA; TNWB; TPBA; TPWA;
Easy To Use
Comfortable Handle
Slide Hammer
Alberto A
Reviewed in the United States on March 11, 2025
I swapped out to the +30% bosch injectors on a Fiesta ST. Made life easier. Took 10m to figure it out at first but super easy to use. Its a shame ill likely never have to use it again but at least i have the right tool. I recommend you get this, the risk is not worth it. Resell this after to recoup some loss.
Josh
Reviewed in the United States on September 28, 2024
Worked exactly as it should. Would recommend.
Honest reviews only
Reviewed in the United States on August 24, 2024
This makes it so much easier to replace my fuel injectors. I'm no mechanic, but I do love being able to replace things as I need to on my truck. This is a must have if you like DIY when it comes to repair and maintenance of your truck. Perfect fit for my 2016 F150 ecoboost 3.5
michael
Reviewed in the United States on June 1, 2024
This is a great tool to have in your arsenal. Makes pulling fuel injectors a breeze. Built nicely, heavy duty. Can’t beat the price.
Laura
Reviewed in the United States on May 1, 2024
If you work on engines or are a mechanic for a living, you know that trying to get some of these fuel injectors out is a real pain. You end up breaking them, or damaging them because they are just fused to the head... Well, this little puller tool makes it a breeze! If you are in a dealership setting, or don't have a lot of special tools, no more need to leave your toolbox to go get the special tools. This is a nice addition to your arsenal.This simply hooks onto the sturdy part of the injector and with a couple small smacks of the small slide hammer the stuck injector is out! Doing the majority of the engine work at my shop, this has been a time saver so far. Would definitely recommend this for consideration if you regularly deal with stuck injectors.
Bill H.
Reviewed in the United States on March 7, 2024
The problem with FORD'S "ECOBOOST" motor is that they are working the thing to it's limit. These engines run HOT inside the combustion chamber. It is why the injectors get stuck and also why the sparkplug electrodes get burned off. There are a few ways of pulling those stubborn injectors. This is one that has a pretty good success rate. Machining them for a tapped hole and then using a slide hammer is the last resort short of pulling the head. And with the proper stud you can adapt this tool to do that if needed. I normally just barrow one of these when needed but since this one came up on the VINE program I figured I would grab it because they do work pretty well. I would recommend getting one of these before you attempt pulling injectors. The $70 isn't all that bad for an insurance policy.
Amanda and Dave
Reviewed in the United States on March 17, 2024
As a professional automotive technician, injector removal on direct injection engines are a common task. Some injectors are harder to remove than others due to age, mileage and operating conditions so some require the use of a slide hammer type of puller like this one.This eco-boost injector tool arrives in a plain white box with the tool well protected in bubble wrap. There is an instruction manual included but the tool is pretty self explanatory. The tool is well made and has a nice mid weight hammer to aid in removal. The tool clamps on to the top of the injector and secures with a sleeve to retain it. This puller works very well.It is nice to see affordable options for tools like this as a broad collection is needed to service vehicle these days. An affordable tool leaves money on the table to purchase others. I give this 5 stars for quality and value.
Customer
Reviewed in the United States on April 9, 2024
la herramienta no sirve
Recommended Products
$31.95
$ 15 .99 $15.99