Your cart is empty.
Your cart is empty. Characteristics:
The RC Front Rear Mudguard is compatible with Traxxas TRX-4M 1/18 Bronco.
The RC Front Rear Mudguard effectively protect your RC car front and rear swing arm from grass, stones, and mud, ensuring your RC car always keep clean. Improves the overall performance of your RC car.
Specifications:
Condition: 100% new high quality
Type: RC Front Rear Mudguard
Material: 3D Print PLA, Stainless Steel
Colors: Black
Quantity: 2pcs/set
Weight : 65G
Compatibility: For Traxxas TRX-4M 1/18 Bronco
Packing list:
1* RC Mudguard Set
seth zorzi
Reviewed in the United States on May 2, 2025
This product requires assembly and a micro Phillips screwdriver is needed. Tool is not included. The main part is 3-D printed not molded. It seems strong. The metal is well printed and seems good quality.If you have the traxxas light kit - THIS WILL NOT FIT. I did a lot of trimming and I still came get the clips to go in right.But if you don’t, this will work just right and it looks good.
xSkyxFox
Reviewed in the United States on March 1, 2025
Pretty neat what these 3D printers are capable of. I really dig the prefabbed rock light inserts and the whole thing is solid!It is a little tight to fit around the body but as soon as you lock in it looks really good.These are specifically made for the Trx4m frameInjora leg aluminum frame won’t work (tried) the skirts are long and holes don’t line up (not a biggy)I’m not sure if I’m a fan of the chrome skids, may paint those later but I’m still enjoying itMakes for a really nice engine compartment down the round if that tickles your fancy tooHave Fun Building!
James M.
Reviewed in the United States on January 15, 2025
Saw these and we needed to try them on my daughters bronco. Pretty cool looking and overall they fit better than I expected. However you do need to trim down the back end of them as the pro light kit does not fit. To add to that I had to trim the inside of the stock fender flares so these inner fenders will slip past them. I'm bummed about needed to cut into it for the pro light kit. I did expect some trimming so these things Dont hurt my review too much.
Hales Yeah
Reviewed in the United States on June 19, 2024
Spent hours assembling only to discover the body won’t fit with the pro light kit installed. Modifying is needed. Other than that it looks good.
leonard gardner
Reviewed in the United States on February 14, 2024
Like the look and fitment of all the screw holes lining up perfectly. Disliked the microscopic screws. With the aid of a magnifying glass these old eye managed. Thankfully plenty of extra screws were provided. Had to make relief cuts for rear light kit. No biggie, that hot rodding.
Bart
Reviewed in Canada on January 2, 2024
Like the title says i was supper excited for these mud gards the pics online make them look supper slick and the do kinda after installation i found it will not let the body clip on properly and will pop off and make the body line not look good the front right mounting spot was just missing on the one for my bronco witch dose not help the body mounting problem the one for my k10 seems to fit the same as the bronco being vary tight to put the body back on and dose not stay clipped down
rick mccubbins
Reviewed in the United States on April 26, 2024
Looks great the tiny screws suck but everything fit perfect
Jason Gauvreau
Reviewed in the United States on April 18, 2024
Looks grest
Dirk
Reviewed in Germany on September 29, 2023
Stabil und Flexibel ist der Kunststoff auf jeden Fall. Auch die Metallplatten sind äußerst präzise gestanzt aber das ich das Metal selber noch mit den 1mm dicken winzigen Schrauben selber noch aufs Kunststoff schrauben muss stand da nicht. Wenn man dicke Finger hat schon eine Herausforderung. Aber Ansonsten sehr gut verarbeitet.
Customer
Reviewed in the United States on December 31, 2023
I was very excited to install this on my bronco, the metal is cut well and the 3D printing is pretty good, but I’m not sure if it’s the 3D printing or the fact that I have the trx4m pro light kit by traxxas, but the body would not fit on the chassis once these inner fenders were installed. Tried for hours to get it to fit, even uninstalled my pro light kit to see if that was the cause of the figment issues, but no. Still wouldn’t fit but I could tell from my hours of tinkering that it is also not compatible with the light kit. Overall very upset I wasted so much time on this but maybe I’ll chop it up myself and make it fit in the future. Maybe they should look into something other than 3D printing for that plastic, or at least have it be resin printed because I said earlier the 3D printing was “pretty good” but there were still impurities.
Recommended Products
