Your cart is empty.
Your cart is empty.Product Description
Guardtier 45 Degree M-LOK Light Mount Compatible with Surefire M300/M600 Series and Streamlight Protac Series Scout Lights
Solid Aluminum Construction
Made from lightweight and durable aluminum materials finished with Mil-Spec type III hard Anodizing.
Seamlessly with MLOK Rail System
Designed to fit M-lok rail with a low profile design.
Offset Mount for Flashlight
Provides secure and easy mounting at a 45-degree angle.
Includes All Necessary Screws to Attach Light Body to Mount.
Offset Mount *1
M-LOK Screw *2
M4*6mm Screw *4
#8-32*1/4 in Screw *4
Allen Wrench *1
MAXIMUM COMPATIBILITY
D. R.
Reviewed in the United States on March 26, 2024
Don't be fooled by the reasonable price. It's a quality mount! It came with two sets of screws to mount the light to the mount. I recommend using some blue Loctite on the threads to keep everything snug. This mount keeps my Surefire clone nice and snug to the handrail. It's also lighter than the picatinny mount, which is a plus! It's maid out of mystery aluminum, so I doubt it's 7075. However, it seems very strong and I'm confident it will hold up well. I've already purchased a few and won't hesitate to purchase more!
Chase1053
Reviewed in the United States on March 18, 2024
This is very well made and comes with a few pieces of hardware to fit different applications. Sits perfect, very sturdy, fair priced.
Brian
Reviewed in the United States on December 9, 2024
I have an old SureFire m300 and these worked great. Cheap and they do the trick.
FuzzyPuppy
Reviewed in the United States on January 2, 2024
This is a well made mount and the fasteners appear to be quality. Matte finish blends with my rail and Surefire Mini Scout M300A. Fit is perfect and flows into the light. All screws are hex head and the provided star wrench is not for these screws. It may be for a knock-off light that uses them. If you use the star wrench it may damage the screws and leave you with a real problem. I bought 6 of these for various lights that use the fixed Surefire mount system. It really brings the light tight into an octagonal rail. There is minimal clearance below the light and next to the front sight. Adjustments are necessary. The two tabs below the M-LOK screws provide a welcome indexing point in the dark. This mount is closest to Daniel Defense, and Knight's Armament 45 degree brackets which run 50-65 bucks. Sturdy and solid and no white or silver logos keep it clean. Use Loctite 222 on the screws, designed for small screws. Magpul recommends 35 inch lbs.,max for the M-LOK fasteners. For the screws into the aluminum flashlight just snug or you'll strip the screw hex or the light body.Finally, the counter-sunk M-LOK flathead screws use a 2.5 mm hex key. The M4 x 6mm screws use a 2.5 mm hex key and the #8-32 x1/4" screws use a 3/32 hex key (Wheeler Fat Wrench 874-877 bit, or o Weaver 503 bit.)
Samuel Neil
Reviewed in the United States on January 14, 2024
Bought this mount on a whim hoping it would work on a feyachi light I had bought. The light was originally for picatinney mounting but it had a couple mounting holes presumably for a bracketed mounting option such as this. The mount is awesome as it lifts the light up and in which gives a better angle to cast the light while also leaving a more narrow profile than having it go straight to pic mount.If you have a magpul drop in handguard, you will need to use spacers. I had some laying around, you could probably fabricate some if you can't find any on amazon. It needs roughly 1/8 inch in order for the 45 degree mount to clear interference from the handguard. Plastic or steel washers could probably work as well.
BZB
Reviewed in the United States on April 30, 2024
This is a nice solid mount works great on my streamlight hlx pro
RCO
Reviewed in the United States on December 31, 2023
Bought 2 of these and it fits perfectly with my streamlight protac . Well made and worth the money. It doesn’t look cheap.
Burnpit
Reviewed in the United States on November 1, 2023
I am running this on a aero precision m-lok hand rail. There is no need to spend 40-100 bucks on these things. I am a combat veteran from OIF. I am going to say that you do need to put a little bit of thread lock on the bolts before installing them. Bolts vibrating loose are not the mounts problem but the operators problem. You need to put the thread lock on there that is meant for weapons platforms. there is no excuse for these mounts to ever come loose unless you stripped them or didn’t put thread lock. This mount also works for other flashlight brands but you need to check your measurements first. The main problem that people run into is the length of the mount, and not the mount itself. So just take a tape measure to whatever flashlight mount you have, and make sure that it lines up with one of these. Buy it and save yourself a bunch of money. ones that you buy from the gun shop are not manufactured any better than these ones are. Most of them all come from CNC milled aircraft aluminum.
Recommended Products
$67.70
$ 28 .99 $28.99