Your cart is empty.
Your cart is empty.Air Temp Sensor 24" Extension Harness fits: Chrysler Dodge Ram Jeep Wrangler This Extension Wire will allow you to relocate your Air Temperature Sensor to a cooler location. Fits most 2000-2008 3.7L, 4.7L, 5.7L & 5.9L engines and many other Chrysler vehicles. Please check your harness & sensor to verify the tab locations match the ones in our pictures, as there were some variances on certain years/models.
Anuj
Reviewed in the United States on August 20, 2024
Didn't work out of the box. Had to resolder the old harness connector onto this product because they used a type of connector that was hard to solder and lower quality than the one that came off the car. So really what these guys sold was a wire with 1 good connector. Still - the only one on the market so we get what we get. '14 Charger RT.
Smealb
Reviewed in the United States on June 16, 2024
Works and fits a 2014 Ram 1500 with the 5.7 hemi. Replaced a wiring extension that I had received for a aftermarket intake that went defective. This fixed my issues and got rid of my prolonged check engine light.
Saleh Sarab
Reviewed in the United States on November 5, 2024
On the female side there was no connection after testing it on multimeterAfter removing the heat shrink there is 2 pins and the two wires aren't welded on it, it just melted on the plasticAfter that I welded it onto the pins and it worked perfectly after I welded themBut still the one I received won't work unless u do some welding on it
Customer
Reviewed in the United States on September 26, 2023
The connector was a little tight so I got a failed read when I tried the first time. Pushed a little harder and it started reading correctly. I didn’t notice any issues with the harness itself.
Customer
Reviewed in Canada on March 31, 2023
As soon as this product shows up, plug it into your vehicle first to check if it works. If not you'll have to pull the pins and wiring and redo it. 3 stars because the product itself is kinda hard to find at this price.
Terminex
Reviewed in the United States on January 4, 2023
Harness did not work. I waited too long before installing to be able to return. when I removed the heat shrink tubing on the male end (white connector) I found a VERY poor soldering job. it is obvious that they take a connector from something else, cut off part of it, and then solder the red & black wires to the connector. unfortunately, on mine they did not solder the red wire to the metal blade connector. it was simply soldered to the plastic. Once I soldered the red wire properly, and put new heat shrink on it, the harness worked. just sucked that I had to do all of the work for how much they are charging for these.
Nikolas
Reviewed in Canada on August 18, 2022
semble de bonne qualité longeur parfaite pour mon cold air k&n très satisfait juste qu’a maintenant
chase
Reviewed in the United States on May 24, 2022
Purchased a used intake for my 18 Jeep GC with a 5.7 Hemi but it was missing the iat extension harness. Ordered this up and it worked perfectly. A little long for what I needed it for but got me up and running.
Terry G.
Reviewed in Canada on August 15, 2021
It worked as suppose to
Cwilson
Reviewed in the United States on January 7, 2021
Worked perfectly on my 2019 ram 1500 5.7. I installed the kn 77 series and the intake temp sensor connector was a snug fig with little play in the wires. This took care of that and gave a lot of slack so the wires won't pinch or rub. 2 zip ties and your good to go.
Domenicio Carroll
Reviewed in the United States on September 14, 2020
I recently came across a neighbor who was selling parts off a totalled 2018 Dodge Charger RT and lucky for me he had a K&N Blackhawk CAI. Although it wasn't complete I got it for a STEAL. One of the parts required was the IAT extension harness which was damaged. Fortunately I came across this and purchased it immediately. Along with a few extra nuts and bolts the extension harness worked like a charm. Just plugged into the original IAT harness, ran the line across my intake, and with a couple zip ties to secure it, the CAI worked at start up with NO errors. Keep in mind when purchasing this is just an extension for the IAT sensor. NOT a replacement. If for whatever reason you're relocating the IAT sensor further away from the intake this will give you the extra slack.
Recommended Products
$24.87
$ 12 .99 $12.99