Your cart is empty.
Your cart is empty.
Fitment:
For DRZ400 2000-2004
For DRZ400S 2000-2024
For DRZ400E 2000-2007
For DRZ400SM 2005-2008/2013-2024
Features:
No Need To Be A Mechanic! Consistent With The Structure Of The Original, This Reservoir Tank Seamlessly Integrates Into Your Bike. You’Ll Have It Mounted In Minutes, Ready To Hit The Road.
Made Of Abs Plastic, Same As The Original. Some Degree Of Visibility Of The Internal Coolant Balance Will Help You Determine If You Need To Refill It Or Not.
Part Number: Replacement of 17911-29F11.
Specification:
Color: White As Pictures.
Material: ABS Plastic.
Package Include:
1* Radiator Tank.
Instruction of Installation is Not include.
NOTE:
Due to production batch problems, some tanks have burrs on the two connection ports, which can be removed with a utility knife. Also please fill some sealant at the joint after the hose is connected.
Tkm
Reviewed in the United States on September 6, 2024
Works perfectly bug what a pita to install. Gotta take off the whole rear end of the bike just about to get this out.
Lauren Bowers
Reviewed in the United States on November 4, 2024
Immediately started leaking after installed from the bottom nipple.
Chris Fisher
Reviewed in the United States on May 30, 2023
Like Jesse Hickman says, you will need to do some work to make this product not leak from the bottom port. After trimming with a razor blade for the first install, it was still leaking. I was able to stop the leaking by carefully filing the nipple part of the bottom port (top and bottom) just enough to get rid of the imperfection in the alignment of their mold which was leaving a crack. I also placed the hose clamp directly on the nipple part of the tank connection during reassembly. It seems to be working properly now.
Linda Eaton
Reviewed in the United States on September 4, 2022
Just like pic
Bryan O.
Reviewed in the United States on September 1, 2022
Works just as good as the one from Suzuki that’s five times as much
Jesse
Reviewed in the United States on February 22, 2022
This is a direct fit for any drz400. I installed the new coolant tank and noticed it was leaking around the bottom port. Checked my hose and clamp with no problems found. Found the new coolant tank had poor machining around the port that the hose connects to. Was not properly made and there were rough edges and imperfections causing the hose to not seal completely. After using a razor knife to get rid of all the plastic burrs and applying some sealant I was able to make it stop leaking. Check your product before installation and get rid of imperfections before installing hose.
Recommended Products
![A-Premium Engine Coolant Overflow Recovery Reservoir Tank [w/Cap & Sensor] Compatible with Freightliner M2 106 2012-2019, M2 112 2012-2017, Replace # A0528531000](images/loading.gif)
$31.36
$ 16 .99 $16.99