Your cart is empty.
Your cart is empty. Specification
Calibration Wavelength: 1310nm/1490nm/1550nm
Optical Connector:FC/SC APC interface
Measurement accuracy : ≤ 5dB
Detector Type: InGaAs
insertion loss: ≤ 1.5dB
Fiber type: SM 9/125um
Threshold setting: 10 groups
Display: color LCD
Stored data: 10
Data interface: Micro USB
Battery: 3 pcs 1.5V AA batteries
Battery life: standby > 20 hours, test > 12 hours
Working temperature:-10~+60℃
Storage temperature :-30~+70℃
Dimension(mm): 18.6x10x50cm
Weight: 150g
Package incdluing
1x PON Power Meter
1x User Manual
Not including the battery
Juan Montejo
Reviewed in the United States on April 24, 2024
Producto defectuoso vendedor no responde y no realizo el cambio del equipo
yimy asned bermudez galeano
Reviewed in the United States on November 22, 2023
Llegó muy rápido.Exelente equipo
Palouse Technology Services
Reviewed in the United States on April 28, 2023
This was a surprisingly good tester, once I got it to power on. I especially appreciate its isolation between wavelengths that many meters (including my $700 AFL meter) do not have! It also wasn't evident to me on the listing, but it does have two ports -- one for the ONT and one for the OLT side, and it DOES PASS THROUGH -- so you can read the power levels in both directions (ONTs will only put out power when they detect an OLT signal).My issue with the meter is the battery bay. The positive connections on the batteries are very short, and many battery positive tips (including our batteries) are just a bit too short to make contact. This unfortunately makes this otherwise good meter useless to me...There is a microUSB power input port that will allow you to run the meter off any USB charger (which is how I initially tested it) -- another nice to have.
Martin Beaulieu
Reviewed in the United States on December 15, 2022
When it stopped working properly, it was worthless
fernando v.
Reviewed in the United States on November 17, 2022
pude medir las potencias y localizar las fallas
Recommended Products
