Your cart is empty.
Your cart is empty.Product Description
Binardat 1 in 1 out IP67 outdoor gigabit PoE extender provides 1×10/100/1000Mbps PoE in port and 1×10/100/1000Mbps PoE out port for remote PoE device. The PoE in port support Max.30W. The PoE extender auto-detects a PoE (15.4W) or PoE+ (30W) devices, Support IP67 Waterproof.
PoE Powered
The PoE extender is powered by PoE switch/spliter. No power adapter needed. The PoE in Port supports 30W input(IEEE802.3at).
IEEE802.3af/at Support
This PoE+ Extender provides up to 30 watts to a connected 802.3at-compliant device or 15W to an 802.3af-compliant device.
Full Gigabit Configuration
1*10/100/1000Mbps PD Ethernet Port + 1*10/100/1000Mbps PoE Por, provide enough bandwith to prevent network bottlenecks.
IP67 Waterproof
The PoE extender uses ABS+PC housing, Its weatherproof IP67 (waterproof and dustproof) rating.
Long Distance PoE
The transmission distance of a PoE out port can be up to 300m with cascade, meeting the requirement of wired transmission.
Easy to Use
Plug and play, No configuring is required. Auto MDI/MDI-X crossover and Auto-negotiation on each port senses the link speed of a network device.
Various Operating Environments
The switch is designed to operate in severe environments and in temperatures ranging from –10°C to +50°C (14°F to 122°F).
Lightning Protection
Short-circuit, overload and high-voltage protection for the PoE extender which helps in cutting the supply off.
Waylon
Reviewed in the United States on May 23, 2025
Extender did not work when I received it.
渡邊二郎
Reviewed in Japan on May 11, 2025
接続し通線okでした。
Bassfishin
Reviewed in the United States on March 15, 2025
I have had this installed for 6 months at the end of 200’ cat6 and connected it to another 100’ of cable. The signal went from weak to great and it has lasted 6 months which is 3 months longer than the last 2 brands I’ve tried. Mind you this is outside in a flower bed as well! Love it!
user-M4Q9H8
Reviewed in Saudi Arabia on January 22, 2025
Good sturdy design but the glands doesn't cover the rj45 connector! Port 2,3&4 doesn't support a camera which requires more than 30 watts and keeps reconnecting attached cameras! May be i need to use the DC port to use port 1
Alberto
Reviewed in Italy on April 28, 2025
Ottimo, facile installazione
Siafu
Reviewed in the United States on June 5, 2024
Running two cameras with this splitter mounted on the side of the building in the sun in the rain, so far so good.
Joe
Reviewed in the United States on May 13, 2024
Great way to extend a POE cable run.
Customer
Reviewed in the United Kingdom on February 24, 2024
I tried a couple of other POI external switches, but this one is the only one that worked perfectly.
Richard Beechy
Reviewed in the United States on December 17, 2024
It's a nice size but the out port on one side quit working within 24 hours. ** Updating the review because the seller reached out and provided support and a refund without return and also after pulling on the cable from the side that was working the non working port started working again. Not sure what the exact issue is but it seems related to having trouble negotiating POE power in some setups although that could be solved with a POE injector I suppose.
Michael Nelson
Reviewed in the United Kingdom on October 7, 2024
This is a great product, definitely designed to withstand use in an outdoor environment.I am using this with UniFi gear and it is just plug and play. Powered using 802.3BT from a US8 switch lite - fired up right away. The LED’s on the top confirm BT (Red) or AT/AF (Green) which is handy.Plugged in my G5 bullet camera and AC Mesh outdoor AP and everything works perfectly.Now for the quirks. I used this with pre-terminated Ethernet cables with jackets and the connectors that came with the switch were barely long enough to fit over the jacket. Not sure if it was the brand of cable (CSL) but it was a bit of a fight getting the gland to fit tightly, not helped by using flat Ethernet cables I will admit.Port one outputs more POE voltage than ports 2,3 and 4 so if you have a device that draws a lot of power, worth making sure it connects to port one.Also, if you’re not using the DC power supply, you need to unscrew the small green section that sticks out before you can fit the blank end to keep the unit water tight. Doesn’t mention this anywhere in the instructions!Finally, this was only supplied with three blanks so worth bearing in mind if you don’t intend on using every port. I had just enough to cover the DC power outlet and ports 3 & 4.All in all, despite the quirks, a decent product. Very easy to use and get set up and the build quality is solid. Much cheaper than the UniFi solution that needs its own cabinet to keep out the rain.
Craig L.
Reviewed in the United States on October 19, 2024
I plan to install an Ethernet cable that may be over 300ft after routing inside the buildings. I bought this product to extend the cable and have tested it. It works perfectly, smartly and safely. I am using this to extend my business network between two buildings and not for just cameras. The throughput checked out at a full 1gbp/s and the network worked properly. I connected both POE and non-POE devices. The unit detected the POE status and applied power when needed and remained off for non-POE devices. During power up the POE output light will flash but does not apply POE output until it detects a POE device is connected protecting non-POE devices. It is weatherproof and well designed. I recommend this for anyone who needs to extend an Ethernet connection.
Recommended Products
$1,266.68
$ 99 .00 $99.00