Your cart is empty.
Your cart is empty.Adding a Front Mount Hitch allows you to pull or push a towable or trailer while it's in front of the vehicle, making it fully visible and easier to maneuver. Included is the standard 2-inch receiver that sturdily bolts directly into the frame. This RANGER attachment works with all Polaris bumpers and rated at 100 lb. tongue weight and 1000 lb. towing. This Accessory is Designed to Fit the Following: Ranger , 2020 RANGER XP 1000 Texas Edition , 2020 RANGER XP 1000 Premium , 2020 RANGER XP 1000 NorthStar Ultimate , 2020 RANGER XP 1000 NorthStar Premium , 2020 RANGER XP 1000 NorthStar Edition , 2020 RANGER XP 1000 High Lifter Edition , 2020 RANGER Diesel , 2020 RANGER CREW XP 1000 Texas Edition , 2020 RANGER CREW XP 1000 Premium , 2020 RANGER CREW XP 1000 NorthStar Ultimate , 2020 RANGER CREW XP 1000 NorthStar Premium , 2020 RANGER CREW XP 1000 EPS NorthStar Edition , 2020 RANGER CREW 1000 Premium , 2020 RANGER CREW 1000 EPS , 2020 RANGER CREW 1000 , 2020 RANGER 1000 Premium , 2020 RANGER 1000 EPS , 2020 RANGER 1000 , 2019 RANGER XP 1000 EPS Premium , 2019 RANGER XP 1000 EPS HVAC Northstar Edition , 2019 RANGER XP 1000 EPS High Lifter Edition , 2019 RANGER XP 1000 EPS Back Country Edition , 2019 RANGER XP 1000 EPS 20th Anniversary Edition , 2019 RANGER CREW XP 1000 EPS Northstar HVAC Edition , 2019 RANGER CREW XP 1000 EPS Back Country Edition , 2019 RANGER CREW XP 1000 EPS Premium , 2019 RANGER CREW XP 1000 EPS 20th Anniversary Edition , 2019 RANGER Crew XP 1000 EPS , 2018-2019 RANGER XP 1000 EPS , 2018 RANGER XP 1000 EPS NorthStar HVAC Edition
wisyakman
Reviewed in the United States on January 5, 2022
Sorry but this did not fit my 2020 Polaris Ranger EV.
Tilly Clark
Reviewed in the United States on September 6, 2021
Does not fit a 2021 polaris ranger ultimate
Russ
Reviewed in the United States on September 13, 2021
Didn't fit
robert h.
Reviewed in the United States on May 18, 2021
Does not fit my 2021 Polaris Ranger XP 1000 Trail Boss. Mounting holes for bolts are 6 in. on center.Need to be 7 in. on center.Please advise how to return.
craig r
Reviewed in the United States on September 24, 2020
Fit perfect added versatility
Duckman
Reviewed in the United States on October 10, 2020
Mounted this up on my 2020 Polaris Ranger crew xp 1000 eps Northstar hvac. Easy enough to install. 2 of the screws are self tapping, I opted to tap the holes first.I wish it was just a couple of inches longer. Putting on an extension is too long and using a standard hitch has the ball in line with the edge of the bumper, so you have to be sure the height of your what you want to connect to can fit between the ball and the bumper. Since it sits so low on the vehicle, you may find you will need to put an extension on first before attaching your hitch with any large offset.I use it to maneuver small trailers, cement mixer, towable welder around the barn. So much easier than trying to back small things in when you can see when they start to turn on you.Just like everything Polaris, its expensive. It is quality, but so are similar hitch mounts for 1/4 the cost, but won't fit a Polaris and I don't have the time to modify them to fit and time is money, even time saved from backing things in.
LaceyO
Reviewed in the United States on November 1, 2019
Great front hitch for your polaris
Recommended Products
$20.98
$ 9 .99 $9.99