Your cart is empty.
Your cart is empty.Product Description
Application
- Fit for 1 1/8inches, 1 1/4inches, 1 5/16inches, and 1 3/8inches pulley hub diameters including 1988 and newer GM cars equipped with Quad 4 engines;
- Fit for 1991 and newer GM minivans with 3.1 L and 3800 V-6 engines; 1991 to current Ford 4.6L engines with a metric shaft.
BTSHUB Power Steering Pump Pulley Service Set
Compatible for GM, Ford, Chrysler Truck
- Features:
- The Automotive Power Steering Pump Pulley Remover Installer Tool Kit is used for Removing and installing steering pump pulley.
- Can be used with Model Vehicles with Saginaw, Thompson;
- And fit for Ford C111 And C2 Power Steering Pumps.
How To Use
1. Lubricate the tool before using it.
2. Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top.
3. Tightly screw the threaded stud onto the center of the end of your puller nut, and then use your tool to loosen and remove.
4. Store the tools safely in the included high quality storage case once your job is completed.
Specification
Screw Size:
5/8" - 18UNF,
5/8" - 18UNF,
3/8" - 16 UNC,
3/8" - 16UNC x M6 - 1.25mm.
Bolt Circle Dia.:
1-1/8", 1-1/4",
1-5/16", 1-3/8"
Screw Size
5/8" -18UNF,
5/8" -18UNF,
3/8" -16 UNC,
3/8" -16UNC x M6 - 1.25mm
Function
The Automotive Power Steering Pump Pulley Remover Installer Tool Kit is used for Removing and installing steering pump pulley.
Package Includes
Disconnect tool,
Bushing,
Screw set,
Carrying case.
WD70
Reviewed in the United States on February 20, 2025
I spent a day and half trying to make it work. It came with no instructions. I followed the instructions from you tube. I do a lot of this type of work. I dreamt all night, to make work! Nothing worked. I barrow my neighbor’s puller, the pulley was off first try!How do poor products get such reviews. I never want to go though anything like this again! Wayne
Darrell A
Reviewed in the United States on August 26, 2024
I've never had to put a pulley on a pump before. I thought it was silly that I needed this tool. I tried putting the pulley on without it. There was no way, so I ordered this kit. Dang this made it easy!!
Phil c
Reviewed in the United States on August 21, 2024
gets the job done
Leroy
Reviewed in the United States on July 10, 2024
I bought this thinking I would get one or two uses out of it, after I did the job at hand the tool itself seemed to hold up, seen no metal after torquing these down to loosen the pulley. It really held up no cross threading. Reliable tool
Jay Leno
Reviewed in the United States on May 6, 2024
Worked great to pull pulley off power steering pump on GM model
Thomas Sparkman
Reviewed in the United States on May 19, 2024
Most of these that I bought in the past won't even work for one application some of them barely get through it and you'd have to throw it away afterwards this one will last several jobs
geo.w
Reviewed in the United States on April 15, 2024
It worked well ,set ups are not as shown in some cases..
greg
Reviewed in the United States on December 21, 2023
This tool was absolutely needed to replace my power steering pump. I only wish it had instructions on proper ways of using it.
Recommended Products
$26.99
$ 13 .99 $13.99