Your cart is empty.
Your cart is empty.Rainbow Confetti PEF+Circle PEK 3D Printer Build Plate for Bambu Labs X1 X1C X1E P1P P1S A1 3D Pritner, Double Sided Smooth Flexible Spring Steel Plate Bambu Sheet for Bambu 3D Printers Bambulabs
Job Vasquez Cubillas
Reviewed in the United States on April 9, 2025
Really bad adhesion. Quality is nice and I’ve tried pla, pla pro, petg, and tpu. None finished properly it just moved around while printing. Don’t buy
Eric Shen
Reviewed in the United States on September 6, 2024
Bambu X1C. Use bed temp 55°C or 65°C all layers. Filament 220°C or 230°C all layers. Performs well. Transfers the hologram to bottom of print. Watch out for finger prints. I wear gloves with rubber fingertips.
Tim T.
Reviewed in the United States on September 17, 2024
This build plate works as expected. Slots in place like stock and holds prints as it should, with bonus ability of adding fancy effects to the base of the prints. Not needing to add adhesive to the plate is nice with just needing to keep the plate clean.It is good to have multiple plates so that you can put it to the side and let it cool off for easier detaching while moving on to the next print on another build plate.
Justin
Reviewed in the United States on August 31, 2024
When it works the parts come out beautiful. I have a hard time getting parts to stick though even with glue and that then takes away from the pretty surface finish.
Pineapple Pizza
Reviewed in the United States on July 25, 2024
No matter what I tried I couldn't get PETG to stick to this. I tried increasing bed temps by 10C over what I usually use and that didn't help. PLA printed fine on it however.
Daniel Neill
Reviewed in the United States on July 16, 2024
This is a great quality printer bed plate, the transference design looks great on the base of my prints. I haven't had any adhesion issues, just wipe down with rubbing alcohol after every few prints to keep it clean. Definitely recommend.
Richard M.
Reviewed in the United States on June 21, 2024
I’ve tried a number of these styles of plates and this one compares favorably.I do have to babysit it a bit though as the first centimeter of some of the new lines on the first layer don’t always stay put. So far it’s only created a few stray strands, not an issue. I do have to intervene occasionally to make sure they don’t catch the nozzle and blob.Once the first layer is safely down it sticks hard till the very end. It’s still good first layer adhesion it’s just a bit quirky. [P1S fully closed due to cold printing room. Textured plate setting with a full bed recalibration]
Keith
Reviewed in the United States on June 19, 2024
I'm not sure what wizardry makes these build plates work, but they have holographic patterns (different on each side) which transfer to the bottom of your prints, a really cool feature! Just make sure that it makes sense to have the pattern on the bottom surface of your print, as it will only be on the surface of your print that is adhered to the build place.Speaking of adhering, you should know that using these build plates is a little more difficult than the regular PEI plates that come with most printers. You really need to clean the build plate well with dishwasher soap (dawn or palm olive) as well as isopropyl alcohol, and make sure you rinse the plate well afterward.You'll also want to increase the bed temperature by 10 degrees, and for at least the first layer, run your nozzle about 5 - 10 degrees warmer than normal to ensure proper adhesion to the build plate.For me, I primarily use PLA, and don't have much of an issue with adhesion now that I've dialed in the settings I needed to use.Your print will have the pattern transferred to it, and by tilting the print at different angles you'll even be able to see the different colors.The most important thing to remember is to NOT remove your print until the sheet has completely cooled off. Otherwise it will damage the coating on the build plate and all subsequent prints will show an outline of that print on the bottom of all new prints.I learned my lesson, hopefully you can learn from mine as well so you don't damage your plates.These plates are the same as the ones being offered by Bambulab, but less expensive. Try it! You'll love the outcome!
Recommended Products
