Your cart is empty.
Your cart is empty.Product Description
RAINPAL(by OLDEGG USA) Designing Quality Rain Barrel Parts Since 2013
Matching Step Drill Bit Available: RAINPAL SDB125 a.co/d/iQ30Gv7
Three large steps(7/8", 1-1/16" and 1-1/4")(8mm Height), works for most RAINPAL Products.
For RAINPAL SSBF020, Please use the 2nd step(1-1/16")
Step drill bit makes cleaner hole with no or minimum burs.
Use with power drill for more control. Impact drive will be too aggressive.
Designed to use on Plastics. Will not last long on steel.
Click "Visit the RAINPAL Store" then "FITTING_ETC" to purchase or use this link: a.co/d/iQ30Gv7
CCTC
Reviewed in the United States on January 4, 2025
Provides a convenient way to access stored rainwater, allowing you to easily fill watering cans or connect a hose for garden irrigation.Over time, spigots can become clogged with debris or develop leaks, requiring occasional maintenance.
Tom W.
Reviewed in the United States on April 7, 2024
Installed in a rain barrel and valve sheared off in my hands yesterday! Can't see why it broke so soon. Requested a refund even though I am outside of the return window. I just don't think it should have broken under routine use.
Warren Kahue
Reviewed in the United States on September 14, 2023
This item was easy to install. Does not leak and built to last.
Rocco.
Reviewed in the United States on August 16, 2023
Very well made, a thick cast of plastic made for a nice spicket. There is no threads on end just saying.
Gaetan
Reviewed in Canada on August 1, 2022
Super merci
Nathan w.
Reviewed in the United States on May 22, 2022
I use this to make a gravity water dripper for my lapidary work, very good, good full range from off to on, (meaning I could make it just drip water) 10/10 would recommend
Customer
Reviewed in Canada on September 21, 2021
Very easy to install however you need either a hole saw or blade drill bits. Careful to ensure the correct diameter. Seal is good. Had it for a few moths with no leaks. My wife loves to look compared to other styles. Great value for the money
jj
Reviewed in Canada on June 19, 2021
Cut the hole and very easy to install but the white o ring squeezes out and thus leaks. Hopefully there is a solution
Fred Sypher
Reviewed in the United States on September 8, 2019
As a Beekeeper I cook up a lot of sugar syrup to feed the bees. I wanted a way to fill quart jars from a 5 gallon bucket without spillage. The Rainpal spigot has so far worked perfectly. A steady flow rather than a heavy gush, a quick shut off without dripping. Only concern I have is the spigot lever is tight and flexes the assembly, but then again, it is in a plastic bucket. I am pleased.
C. Winton
Reviewed in the United States on August 25, 2014
Be warned, installing the bulkhead fitting for this spigot requires drilling a very large hole in your rain barrel. I ordered one of these to replace the 3/4" plastic spigot I had busted on my Fiskars rain barrel. As a replacement, this spigot had seepage around the hole despite using thread seal. Its threading didn't extend far enough into the barrel to secure it with a sealing ring from inside. The bigger downside is that in contrast to the original spigot, this spigot does not have a threaded spout; i.e., you cannot attach a hose to it. The supplied bulkhead fitting would quite likely have taken care of the leak issue, but enlarging the hole to be able to use is was not an option since I don't have a drill that large. I did find a brass spigot at Home Depot that I could secure with a sealing ring from inside the barrel, the trip for which was what I was trying to avoid in the first place.
Head Trainer
Reviewed in the United States on October 14, 2014
If you are doing this as a DIY this is the item to have. Well made, installs in minutes and seals with almost no effort at all. I seldom write reviews but this product is excellent as well as attractive.I purchased a second one I was so pleased with the first. I give it the highest of recommendations!
Recommended Products
$89.88
$ 40 .99 $40.99