Your cart is empty.
Your cart is empty. TRUGLO 45 DEGREE OFFSET RED DOT SIGHT MOUNT:
One configuration that you will be fond of is the use of a dot-optic mounted at a 45-degree angle. And with the growing popularity of this configuration, there is a 45-degree Offset Red Dot Sight Mount by TruGlo, that features a wide range of optics it can be accommodated with.
This small but significant piece is made using CNC-machined aircraft-grade aluminum for years of service. It allows additional optic backup or close-range use and mounts with Picatinny / Weaver-style rails.
It also comes with three T.O.P.S. universal adapter plates to cover the most popular optic model compatibility.
In addition to this flexibility, the design style and look of this universal sight mount will really strike you as both sleek and versatile.
Be sure, this Sight Mount provides an entirely new angle to your shooting experience.
MAIN FEATURES:
- Compatible with popular optic models;
- Mounts an additional optic for backup or close-range use;
- Mounts to guns with Picatinny / Weaver-style rails;
- Ambidextrous design for versatile placement;
- T.O.P.S. Universal (most major optic brands);
- CNC-machined aircraft-grade aluminum.
Colin S.
Reviewed in the United States on January 8, 2025
Have you ever heard of co-co-witness? Well, now you have. Running Holosun 510C with a co-witness front-rear iron sights on top rail, and a 45-degree offset Holosun 407c with 45-degree offset front-rear iron sights. Swag on swag on swag.But seriously, these work great. Much more affordable than the other options I was looking at, and these are BETTER than the other brands because it allows you to go ambidextrous (left-side) with your offset.So, you could have red-dot offset on the left, and iron-sight offset on the right.These work great. I picked up a few and paired them with the SwampFox Liberty using the #2 (RMR) footplate that comes with the TruGlo offset.10/10 would recommend these!
Mike
Reviewed in the United States on August 8, 2024
I've had this mount for awhile now. Never came loose, can be mounted for a left or right hander. TruGlo superiority.
727 Solutions LLC
Reviewed in the United States on June 29, 2024
When I was buying this mount I looked on the manufacturer's website and Google searched forums trying to figure out what exact red dot foot prints would fit this and found zero info. I bought it anyway and what do you know on the back it says exactly what foot prints fit this mount I don't know why it would have been so hard to put in the description what foot prints fits this mount but they didn't. Here is a photo of the back of the package detailing what fits this mount so everyone else doesn't have to hope it works for them. Other than that the mount is pretty nice very well made I really like how each plate gets mounted to the body with stainless alignment pins in two screws.
Alfredo Cipres
Reviewed in the United States on December 15, 2024
It looks like it work but I didn’t get the right item
Rich in VA
Reviewed in the United States on December 30, 2022
I'm very pleased with the offset mount. Changed out the baseplate to accommodate my Holosun 507c X2 in just a few minutes. Easy peasy. Mount seems very sturdy. Slid right under my Larue mount. Nice product and would certainly purchase additional if necessary.
Win
Reviewed in the United States on September 18, 2021
This offset works w/ a vortex venom but I had one small issue during install. I really had to over tighten the screws to the point where I thought I was stripping the screws. You really feel like you’re breaking something while installing the optic.I double checked and the screws are slightly mashed at the end but still thread on sorta fine. I put some blue loctite on and am hoping this will not fail. Had to drop one star.I have two other offsets from different manufacturers and this is not the case at all. Screws fit better and I don’t have this weird feeling like something is off or out of spec.
EEMAN
Reviewed in the United States on March 25, 2021
This is truly the multi-tool of offset optic mounts. As long as your optic mount has a removable base, this unit comes with all the plates that support the various footprints. Whether that is the Doktor footprint, the Aimpoint Footprint, or the Trijicon RMR footprint, this offset has them. Many many other brands will likely use one of the three if their base is removable. I especially like the fact that not only can I swap the base, but the base can be rotated 180 degrees so I can left-side mount the optic.I only wish manufactures BUIS offset were as smart about reversibility. The front site usually is a non issue other than the way it flips up/down, but the rear sight completely messes up the angle cuts for visibility in the holes, as well as any sort of markings on the CQB for adjusting windage.This is a well thought out and sturdy offset mount for a backup reflex mount when pairing with a magnified optic or scope.
Dave & Karen
Reviewed in the United States on January 28, 2020
I included several pictures for you to see how it works. One of the pictures shows the mount I was using. It worked and got the job done, however you had to use the adapter from Vortex with the mount. I didn’t like the little knob sticking out and the mount ended up being too close to my main scope. I wasn’t able to turn on the Venom without the tip of a round or a flat blade screw driver. That was a pain. Again it worked and the older mount was cheaper, but the TruGlo mount is a better quality product for sure! I am able to turn it on and off no problem now and easily adjust the brightness. I also love how the TruGlo mount doesn’t need the stock Vortex mount plate with the little knob. This set up is very clean and appears to be very sturdy. It came pre set up with plate #1 for my red dot, but when I looked, their mounting screws did not have any Loctite on them. An easy correction, as I keep blue ‘service removable’ Loctite on hand for these type of occasions. Overall I am VERY pleased as this product works perfect for me. I would suggesting reviewing Vortex specs so you don’t strip your Torx screws when mounting the red dot and don’t forget to Loctite everything. They are small and could easily get stripped if you over tighten them. Hope this helps.
Recommended Products
