Your cart is empty.
Your cart is empty.Product Description
2pcs Tow Mirrors Wiring Harness Tow Mirror Adapter Harness for Cargo Running Turn Signals Light
- For Chevrolet Silverado 1500 2014-2018
- For Chevy Silverado 2500 HD 2015-2018
- For GMC Sierra 1500 2014-2018
- For GMC Sierra 2500 HD 2015-2018
Specification:
- Color: Multicolor
- Material: Plastic
- Wire Gauge: 22 AWG
- Total Length: 58cm / 22.83"
- Include 2x tow mirror wiring harness, 5x zip ties
- Features:
- Durable copper wire for better electrical conduction and heat resistance
- Connect with ABS plastic port, insulation layer to avoids leakage and surface hardening.
- Replace the tow mirrors wiring harness for turn signal light, running light, cargo light (reversing light).
Wiring Connection
- Blue Cable-Running Light-Pin#11
- Red Cable-Turn Signal Light-Pin#41
- White Cable-Cargo Light-Pin#9
- Black Cable-Groud-Fix with screw.
- Passenger side is the same connect pin numbers.
- Please align pins in the right direction before inserting them.
- Notification
- This harness will only work if the truck was built after 08/14, please check by looking on the driver side door on the cab sticker where your vin # is at.
- If your 1500 or 2500 came with small mirrors from factory, you will need this harness for Cargo lights , Running Lights ,Turn signals to work.
Kyler G.
Reviewed in the United States on January 6, 2025
the black end of the connecter didnt work and needed to be re cut
Hammer
Reviewed in Canada on July 9, 2024
Bought for my aftermarket tow mirror wrong plug in. Has to cut all the wires and r wire only thing that worked was the door harness pig tails to plug in
steve
Reviewed in Canada on June 2, 2023
The mirror were put on not connected because I didn't receive any wireing harness .Now I have to open the door panels up again.
Customer
Reviewed in Canada on June 18, 2023
This kit made finishing the mirror install very easy to complete as all the information was included in the kit for pin number locations, length of wire. Only thing you could add to kit would be to add this kit to the mirror themselves. The wires that come with any mirrors are way too long and blank ends. Not easy to find the correct ends that fit the pin blocks, so the kit solves that problem.
Recommended Products