Shopping Cart

Your cart is empty.

Your cart is empty.

Extension Ladder Pulley Kit for Werner 31-12 - Replacement Pulley Assembly for Werner All Aluminum Extension Ladder（with Instruction Manual）

4.6 (9) Write Review
Free shipping on orders over $29.99

$10.89

$ 4 .99 $4.99

In Stock
  • Good Product：High-quality Extension ladder parts help you get your ladder back up and running quickly and without difficulty.
  • Fit：pulley for extension ladder plenty of room for 7/16 and 3/8 ropes and still enough contact to move the wheels.
  • Illustrate：Possible installation tools: Remove the old pulley with a chisel and hammer, or use a saw tool to remove it. Use a 7/16-inch wrench to install additional accessories.
  • Note：suggest you feed the rope through before you tighten the screw and lock nut to close the bracket over the ladder wrung.
  • Excellent After-sales：If you have any questions about this extension ladder parts, please let us know by email and we will respond within 24 hours.


Product Description

extension ladder pulley kit
pulley for extension ladder
werner extention ladder
extension ladder accessories
ladder extension

Customer
Reviewed in the United States on September 21, 2024
Worked great.
Lucas
Reviewed in the United States on August 28, 2024
Nice
Lester
Reviewed in the United States on June 4, 2024
Works great
R. C. Schmiedeberg
Reviewed in the United States on March 9, 2024
Fairly easy to install, I had to buy a pop rivet gun to install.
peteg
Reviewed in the United States on February 25, 2024
originally extension ladder pully broke and purchased this replacement. worked great.
Rich B
Reviewed in the United States on January 21, 2024
This is way better then the origonal plastic pully. Solid, and easy to install.
randy
Reviewed in the United States on January 19, 2024
Have not installed yet but loos like good quality
Mark Goodrum
Reviewed in the United Kingdom on December 27, 2023
This can be used on tall ladders with a rope to pull them up from the ground.
J.J. Smith
Reviewed in the United States on April 15, 2023
I had an aluminum extension ladder that came from my father that was probably 50 years old and had no manufacture name on it. I chose to fix it up first before giving it to our son, so I added this pulley to it, since originally it only had a rope with no pulley. Pretty simple, just had to drill a small hole for the rivet and then bolt the pulley on. Normally, you would need to drill the old rivet out if you are replacing an old pulley. Note: you will need a rivet gun to install this properly.