Your cart is empty.
Your cart is empty.Product Description
Compatible with a broad range of engines, our kit is a versatile tool kit for automotive technicians and DIY enthusiasts.
The kit comes in a blow-molded carrying case, offering easy transportation and quick organization for busy mechanics.
Comprehensive Pulley Removal Kit
Package includes 1 x Puller Body, 1 x Jaw & Sleeve Assembly (3pc), 1 x Center Screw, 1 x Center Screw Button, 1 x Thrust Bearing, 1 x Thrust Washer, 1 x Puller Pin For Quad 4, 1 x Screw Installer for Quad 4, 1 x Puller Pin For G.M. 3.1, 1 x Screw Installer for G.M. 3.1, 1 x Screw Installer for 4.6, 1 x Universal Screw Installer and 1 x carrying case.
High Quality Construction
Crafted from high carbon steel, our pulley puller and installer tools offer durability and precision. Each piece is heat treated for added strength and corrosion resistance, ensuring longevity and reliable performance.
Removal
- Combine the center screw and the puller body, with both hex ends in the same direction
- Fit the center screw button, or one of the puller pin/screw installer (if required) in to the open end of center screw
- Set the larger flange puller body into the pulley hub
- Place two halves of the jaw & sleeve assembly around the hub and the flange. Slide in the sleeve around two halves to secure its position.
- Use your wrench to hold the puller body steady while turning the center screw inward by electrical drill.
Installation
- Lubricate the center screw. Thread the required puller pin/screw installer into the center screw.
- Combine the center screw and the puller body, with both hex ends in the same direction.
- Slide the bearing and washer over the puller body.
- Thread the assemply into the end of the pulley shaft, with bearing against the pulley face. Tighten the center screw to finish installation.
Juniel
Reviewed in the United States on May 24, 2025
Package arrived quickly. It works great. Easy to use. Good value.
Pat bollman
Reviewed in the United States on February 15, 2025
Really good item
Ashley
Reviewed in the United States on January 30, 2025
Used for a 98 ford expedition 5.4 2v power steering pump had to swap pulley was able to remove a 30 year old pulley off in the good old Sc I’ve used they before when working with ford Modular’s make sure to use the silver stud to extract and for installation use the see pictures make sure bearing toward nut and free spin of bearing toward the item you removing with thrust washer toward part .!!!!even though I think it should be flipped where thrust washer first and then bearing free spin toward nut but it only work if you had another thrust washer so each side of bearing gets a thrust washer this tool would be perfect
Recommended Products